Pilot-rc PREDATOR 2.2m Sport jet / full composite
10-09-2018, 06:47 AM
#226
Join Date: Aug 2005
Location: Wickford, UNITED KINGDOM
Posts: 263
Received 0 Likes
on
0 Posts
I think you'll enjoy it. Got one more flight today - getting used to the power available with the 210, definitely very manageable. I did one full throttle pass over the runway but didn't go full throttle until about over the threshold and then I pulled vertical, max speed on that pass was only 179 (GPS), obviously vertical is virtually unlimited but the 210 is not overkill at all. Here's a runway shot. By the way, knife edges are very good, no coupling and doesn't need too much throttle or rudder.
10-10-2018, 03:04 PM
#228
Join Date: May 2013
Location: , MEXICO
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
hello guys i have a problem, i crash a top rc aspire jet, but i have the landing gear intact and working, i mesure the height and its ok but the diameter of the wheels its more bigger nose and main land gear, i wanna know if some one can tell me the diameter of the hole in the wings, and i do not know if i can only change the tires? or what can i do?
i will used with a 2.2 predator
top rc landing nose wheel and tire diameter its 75mm and main landing diameter are 90mm so will they fit in the nose and wings?
this is the predator landing gear mesures
i will used with a 2.2 predator
top rc landing nose wheel and tire diameter its 75mm and main landing diameter are 90mm so will they fit in the nose and wings?
this is the predator landing gear mesures
Last edited by oukenfold; 10-10-2018 at 03:19 PM.
10-10-2018, 03:21 PM
#229
My Feedback: (1)
hello guys i have a problem, i crash a top rc aspire jet, but i have the landing gear intact and working, i mesure the height and its ok but the diameter of the wheels its more bigger nose and main land gear, i wanna know if some one can tell me the diameter of the hole in the wings, and i do not know if i can only change the tires? or what can i do?
i will used with a 2.2 predator
top rc landing nose wheel and tire diameter its 75mm and main landing diameter are 90mm so will they fit in the nose and wings?
this is the predator landing gear mesures
i will used with a 2.2 predator
top rc landing nose wheel and tire diameter its 75mm and main landing diameter are 90mm so will they fit in the nose and wings?
this is the predator landing gear mesures
10-10-2018, 03:35 PM
#230
Join Date: May 2013
Location: , MEXICO
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
ufff perfect Dccalt thanks men, for the picture i was crosing finger they fit, and the nose wheel do you think i have a problem ? its diameter is 75mm? what i see its that the base of the retractor are bigger maybe i will have to drill them
10-11-2018, 03:34 AM
#234
My Feedback: (1)
The main gear actuators should fit in the pockets, here're some more pictures with a ruler:
10-11-2018, 04:52 PM
#238
My Feedback: (13)
Join Date: Aug 2008
Location: Aston,
PA
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Hello everyone, I'm new to this thread and I'm excited about all the great reviews about the predator. I'm (we're) looking to possibly purchase 3 of these (me, my father, and friend) and wanted to get some info regarding current wait times from the factory? Any help is appreciated!
Ryan
Ryan
10-12-2018, 09:10 AM
#241
Join Date: Jun 2008
Location: zhongshanGuangdong, CHINA
Posts: 88
Likes: 0
Received 1 Like
on
1 Post
Hello everyone, I'm new to this thread and I'm excited about all the great reviews about the predator. I'm (we're) looking to possibly purchase 3 of these (me, my father, and friend) and wanted to get some info regarding current wait times from the factory? Any help is appreciated!
Ryan
Ryan
thanks
tony
10-12-2018, 04:23 PM
#244
Join Date: Jun 2008
Location: zhongshanGuangdong, CHINA
Posts: 88
Likes: 0
Received 1 Like
on
1 Post
Chief usually order by container. so it take a little long time. but it is more fast once they have in stock. because if you order from the factory, the factory produce after you make order. but once chief has in stock. you can get it immediately.
10-12-2018, 09:44 PM
#245
Join Date: May 2013
Location: , MEXICO
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Predator arrive to mexico.
Well it arrive, wait only 15 days, because i order to the factory, tha paint its increible, it came well pack, and the best part its the hardware all in their bags servo leads all the stuff that every jet need to come with, i will began next week the setup, i will put a swiwin 180, hope its not to much.
10-15-2018, 11:47 AM
#249
Join Date: May 2014
Posts: 343
Likes: 0
Received 0 Likes
on
0 Posts
i like the smoke tank option too. i got tony to send me one for mine.. very nice plane with super finish...the 2 part fuse is for lower shipping costs due to box size.. mine from chief is solid fuse..
no fear ordering direct with tony.. great service and you get latest mods and hardware.
no fear ordering direct with tony.. great service and you get latest mods and hardware.
10-15-2018, 12:03 PM
#250
I'm in...picked up the Black/Yellow/Red one in person at Chief last week. Brett was great to deal with, made the process easy. My fuse is one-piece. Will be going with a k140. Very impressed with it so far.
