MaJ. Woody

My Feedback: (28)

Hi Guys.
I need to order some nomenclature and have tried e-mailing Jerry a couple times with no response. I also tried calling but the phone has been disconnected. Any idea if he is still in business or how to reach him?
Thanks,
Dom

Desertlakesflying

My Feedback: (28)

Try Calli......

https://callie-graphics.com/

RCISFUN

My Feedback: (44)

I was going to suggest Calli to Dom, but he would need to have them evaluated to the MIL-DTL-43719D standard before he would place them on his aircraft ..
Just having fun with you Dom!

MaJ. Woody

My Feedback: (28)

Hi Guys.
Rich you know me too well LOL. I use Callie for a lot of things and like her work. For nomenclature, I wanted the dry transfers which she does not offer. If I cant get those, I will type up my own and print them on water transfer decal paper. I have done this many times in the past. I guess Aeroloft is an option but I dont know how to reach them.

IFLYBVM2

My Feedback: (359)

Flightline graphics in the UK is , in my opinion, the 'gold standard' for dry transfers, nomenclature, and paint masks.
If you try them once, you will understand.
-Mike O.

ravill

My Feedback: (11)

Then there is taylormade in das Deutschland. They do a pretty good job too. I used some wet transfers before.

Doug Cronkhite

My Feedback: (34)

Pretty sure Jerry shut down ProMark some time ago.

MaJ. Woody

My Feedback: (28)

Thanks guys. I decided to make them myself as I have done in the past.

Spencer K

My Feedback: (14)

Has anyone on here been successful in making their own dry transfers? I recently had to make one that was too detailed for a vinyl cutter (paint mask) so it left me no choice as every other marking on my jets are almost always painted. The results turned out pretty good but its a pain. Just wondering if there has been anyone else who has successfully created their own, especially in color which I have been unsuccessful. Here’s a shot of my 1/5 F-16 tail with my self made dry transfer and its holding up well so far!

mr_matt

My Feedback: (10)

i made some dry transfers several years ago. it was a very involved process and as i am sure you know white it the hardest color, at least it was for me.

Dieselman1220

My Feedback: (25)

Since this discussion is about decals, any idea where I can get some some peel and stick rivets?
Approx 1/5-1/6 scale. Callie does not do those.

rhklenke

My Feedback: (24)

Joseph,

Mirce models does some. Mirce Rivets Set - nsmodelers.rs
He's a good guy to deal with...

Bob

Misha Javornik

Pro-Mark is still in business as far as I know. Ordered some rivets couple of months ago and had no problem getting them. Call Jerry 618 742 6300 or send a E-mail
[email protected]
Goood Luck

Misha