Cmjets f-5
#1
Thread Starter
Cmjets f-5
Hi friends, if you saw the pictures of Jets&Props 2022, you would see my new model and first kit, F-5 1/4 scale, this model is made from Tomahawk molds, now I´m the owner of these molds and will produce the kit, the first model will be flown by Martin Pickering and the first kit will be available in November. One or two engines version fror choose, I will offer replace parts for airframe and for landing gears. The 2 seats version will available too, Too the posibility of paint service and pnp version.
I will upload here news for keep you informed.
Thanks all.
Carlos
I will upload here news for keep you informed.
Thanks all.
Carlos
Last edited by cmjets; 09-16-2022 at 02:31 AM.
The following 9 users liked this post by cmjets:
Afterburners (09-16-2022),
Dansy (09-16-2022),
grbaker (09-16-2022),
Halcyon66 (09-16-2022),
jcterrettaz (09-17-2022),
and 4 others liked this post.
#5
Carlos,
May i ask why you closed the engraved surface details tomahawk had, and replaced them with ones that look they were plottered and glued on? I feel the model has suffered from this rework in its quality...i would engrave them again in this quality model.
No offense, just trying to help improve...
May i ask why you closed the engraved surface details tomahawk had, and replaced them with ones that look they were plottered and glued on? I feel the model has suffered from this rework in its quality...i would engrave them again in this quality model.
No offense, just trying to help improve...
#7
Thread Starter
If you look other F5 Tomahawk you will see same surface details.
The following users liked this post:
Malcolm H (09-17-2022)
#11
Thread Starter
Hi again, the molds of the F version are almost ready, this week important news.
I hope you like the longer version. 3.75m !!!
In short photos of the F5F model complete !!!
BR from Spain.
Carlos
CMJETS.com
I hope you like the longer version. 3.75m !!!
In short photos of the F5F model complete !!!
BR from Spain.
Carlos
CMJETS.com
The following 7 users liked this post by cmjets:
Canadian Man (01-03-2023),
causeitflies (01-01-2023),
Frank Alvarez (01-08-2023),
Halcyon66 (01-02-2023),
harpoonrs (01-03-2023),
and 2 others liked this post.
#13
My Feedback: (23)
Looks great Carlos!
Do you have any good documentation on the Canopy hinge mechanism and its geometry? Its about that time for me to start figuring it out for my T38 project and it is essentially the same. Also, would you be interested in quoting for a set of tanks (I can provide the Cad model of the tanks)?
Thomas
Do you have any good documentation on the Canopy hinge mechanism and its geometry? Its about that time for me to start figuring it out for my T38 project and it is essentially the same. Also, would you be interested in quoting for a set of tanks (I can provide the Cad model of the tanks)?
Thomas
#14
Thread Starter
Looks great Carlos!
Do you have any good documentation on the Canopy hinge mechanism and its geometry? Its about that time for me to start figuring it out for my T38 project and it is essentially the same. Also, would you be interested in quoting for a set of tanks (I can provide the Cad model of the tanks)?
Thomas
Do you have any good documentation on the Canopy hinge mechanism and its geometry? Its about that time for me to start figuring it out for my T38 project and it is essentially the same. Also, would you be interested in quoting for a set of tanks (I can provide the Cad model of the tanks)?
Thomas
fell free of contact me by email:
[email protected]
thanks
Carlos