Go Back  RCU Forums > RC Airplanes > RC Jets
Reload this Page >

Shalesh Patel Sabre

Community
Search
Notices
RC Jets Discuss RC jets in this forum plus rc turbines and ducted fan power systems

Shalesh Patel Sabre

Thread Tools
 
Search this Thread
 
Old 12-28-2005, 09:57 PM
  #1  
Mike Haddox
Thread Starter
My Feedback: (5)
 
Join Date: Dec 2001
Location: Dubach, LA
Posts: 321
Likes: 0
Received 0 Likes on 0 Posts
Default Shalesh Patel Sabre

Does he still make the kit? Or did he ever?
Old 12-28-2005, 11:01 PM
  #2  
EASYTIGER
Banned
My Feedback: (119)
 
Join Date: Dec 2001
Location: nyc, NY
Posts: 7,676
Likes: 0
Received 1 Like on 1 Post
Default RE: Shalesh Patel Sabre

It's funny, just today the back issue of RCJI with the write up on that arrived...I had ordered it to get the article on the Chris Golds Supermarine Swift, as I am going to build one, and I was just floored again by that Sabre. That thing was AWESOME.
Never heard of it being kitted, I did hear that he built two, one to test things out, and one to competition spec.
Old 12-28-2005, 11:03 PM
  #3  
LGM Graphix
My Feedback: (22)
 
LGM Graphix's Avatar
 
Join Date: Apr 2003
Location: Abbotsford, BC, CANADA
Posts: 5,800
Received 59 Likes on 41 Posts
Default RE: Shalesh Patel Sabre

It was never kitted but I do know the molds have been bought, I just don't know if the manufacture that now owns the molds wants that info out, so in the future there will be a kit of it.
Old 12-29-2005, 12:52 AM
  #4  
seanreit
My Feedback: (60)
 
seanreit's Avatar
 
Join Date: Apr 2002
Location: Cedar Park, TX
Posts: 7,434
Received 7 Likes on 3 Posts
Default RE: Shalesh Patel Sabre

I saw the one at Superman a few years ago, is that the same jet? Or is this the one they were gonna fly out in California in the dry lake area? I think there were two different very large F-86's if I remember correctly, but I've slept since then, or Drank Moose Juice, or something.
Old 12-29-2005, 01:21 AM
  #5  
P. Richards
My Feedback: (3)
 
P. Richards's Avatar
 
Join Date: May 2002
Location: Las Vegas
Posts: 1,308
Likes: 0
Received 7 Likes on 3 Posts
Default RE: Shalesh Patel Sabre

I talked with Mr. Patel at Best in the West some time ago and he stated that it would be very difficult to sell as a kit because of the size, it would be extremely expensive. Bob Violett had one made a long time ago in fact I believe this was the same guy that made the one for Mr. Patel. They are both the same size but the one for BV had different locations for the hatches. it would be nice if someone could make an arf version.

P. Richards aka Swat Team[8D]
Old 12-29-2005, 07:11 AM
  #6  
WhoDaMan
My Feedback: (164)
 
WhoDaMan's Avatar
 
Join Date: Dec 2001
Location: Davis, CA
Posts: 4,243
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

Your right J:
The molds were purchased and there will be an all composite kit in one or two years



ORIGINAL: LGM Graphix

It was never kitted but I do know the molds have been bought, I just don't know if the manufacture that now owns the molds wants that info out, so in the future there will be a kit of it.
Old 12-30-2005, 02:34 PM
  #7  
GlennisAircraft
Senior Member
My Feedback: (1)
 
Join Date: Jan 2002
Location: West Linda, CA
Posts: 415
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

Talked to Shailesh today - not sold

Dennis
Old 01-16-2008, 02:37 PM
  #8  
seanreit
My Feedback: (60)
 
seanreit's Avatar
 
Join Date: Apr 2002
Location: Cedar Park, TX
Posts: 7,434
Received 7 Likes on 3 Posts
Default RE: Shalesh Patel Sabre

Any updates?
Old 01-16-2008, 04:01 PM
  #9  
dbarrym
My Feedback: (47)
 
dbarrym's Avatar
 
Join Date: Oct 2003
Location: Carlsbad, CA
Posts: 1,346
Likes: 0
Received 1 Like on 1 Post
Default RE: Shalesh Patel Sabre

I know there were a few "kits" made up, something like 10 or so. I've recently seen two that were being geared up and have now been delivered (RTF) to the lucky new owners. Can't say any more than that (super secret squirrel promise).

From what I was told these were not really kits, per se, but rather semi-kits for experienced builders. VERY pricey. It is one awesome plane - HUGE presence.

here's a couple pics of Shailesh Patel's own F-86 from BITW 2005...keep in mind in the last pic that the shadow of the EZ-Up is about 11' square...

Barry
Attached Thumbnails Click image for larger version

Name:	Tr49485.jpg
Views:	169
Size:	233.2 KB
ID:	852902   Click image for larger version

Name:	Yu63850.jpg
Views:	148
Size:	132.2 KB
ID:	852903   Click image for larger version

Name:	Qv53549.jpg
Views:	111
Size:	148.1 KB
ID:	852904   Click image for larger version

Name:	Uo36797.jpg
Views:	103
Size:	135.9 KB
ID:	852905   Click image for larger version

Name:	Ny26291.jpg
Views:	97
Size:	172.4 KB
ID:	852906   Click image for larger version

Name:	Iz37122.jpg
Views:	102
Size:	171.7 KB
ID:	852907   Click image for larger version

Name:	Wy48074.jpg
Views:	118
Size:	213.9 KB
ID:	852908  
Old 01-16-2008, 04:03 PM
  #10  
ianober
My Feedback: (12)
 
ianober's Avatar
 
Join Date: Aug 2002
Location: Scottsdale, AZ
Posts: 4,462
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

Im sure an ARF will never happen, and if it does there will only be one or two. I saw this bad boy once back in the day (2000-2001, can't remember exactly), Shailesh had brought it by the EBRC airshow in his trailer but didn't fly it. Looks great!!! It is basically a UAV!!
Old 01-16-2008, 04:26 PM
  #11  
seanreit
My Feedback: (60)
 
seanreit's Avatar
 
Join Date: Apr 2002
Location: Cedar Park, TX
Posts: 7,434
Received 7 Likes on 3 Posts
Default RE: Shalesh Patel Sabre

The only airplane I ever saw that I said I would buy a P-200 full retail no questions asked if I was able to get my hands on one. This particular jet has been my favorite. I saw this jet at Superman before I even owned a Turbine. Ever once in a while it sure is nice to know it's still around in one form or another. Thanks for the updated info. Beautiful!
Old 01-16-2008, 04:46 PM
  #12  
drdoom
My Feedback: (9)
 
Join Date: Apr 2002
Location: Belton , MO
Posts: 3,126
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

Looks Like a nice project for Jet Model Products.
Very nice. Paired with the new AMT Netherlands 86 Lb turbine.
I Know that Tom was interesed, before the Dauntless.
Old 01-16-2008, 05:53 PM
  #13  
GlennisAircraft
Senior Member
My Feedback: (1)
 
Join Date: Jan 2002
Location: West Linda, CA
Posts: 415
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

It was just at Scale Masters in October - still going strong

Dennis
Old 01-16-2008, 05:55 PM
  #14  
ianober
My Feedback: (12)
 
ianober's Avatar
 
Join Date: Aug 2002
Location: Scottsdale, AZ
Posts: 4,462
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

ORIGINAL: drdoom

Looks Like a nice project for Jet Model Products.
Very nice. Paired with the new AMT Netherlands 86 Lb turbine.
I Know that Tom was interesed, before the Dauntless.

Not sure Tom would want to make a model that would cause so much grief to the user in the US that they couldn't get around the AMA and all their restrictions, but who knows. It is a GREAT looking model though.


Anyone know if Shailesh will be at BITW this weekend? If so then I am packing up and going for sure!!!!
Old 01-16-2008, 09:48 PM
  #15  
Shui
My Feedback: (2)
 
Shui's Avatar
 
Join Date: Feb 2002
Location: Heathrow, FL
Posts: 447
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

Hey Guys,

I've flown Jim Jensen's one about 20+ flights now and it's an awesome machine. It eats up some sky though, but is a great flier, no question. It's a moose to move around and transport (1-piece fuse).

There were 7 made outside of Shailesh's, and Mike, talk to Grice, he can fill you in on them, there's 1 floating around that's "available" in a kit-type form that I know of.

Jim's got the wing tanks on now and it looks really nice. There's some in the middle east, a few that'll pop up in southern Cali, and Jim's in MN that I know of.
Attached Thumbnails Click image for larger version

Name:	Mj24350.jpg
Views:	82
Size:	29.0 KB
ID:	853112   Click image for larger version

Name:	Mi22152.jpg
Views:	89
Size:	54.2 KB
ID:	853113   Click image for larger version

Name:	Wp32141.jpg
Views:	75
Size:	37.1 KB
ID:	853114   Click image for larger version

Name:	Xq44522.jpg
Views:	85
Size:	49.5 KB
ID:	853115   Click image for larger version

Name:	Ju11845.jpg
Views:	88
Size:	41.5 KB
ID:	853116   Click image for larger version

Name:	Hy35426.jpg
Views:	84
Size:	62.0 KB
ID:	853117   Click image for larger version

Name:	Gi85902.jpg
Views:	154
Size:	68.2 KB
ID:	853118  
Old 01-16-2008, 10:19 PM
  #16  
David Searles
My Feedback: (49)
 
Join Date: Apr 2002
Location: SANTA ANA, CA
Posts: 2,182
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

Sung Kim has a really nice one, built by Joe Grice, sitting in the shop waiting to see some air!
David S
Old 01-17-2008, 01:58 AM
  #17  
Details 4 Scale
My Feedback: (3)
 
Join Date: Apr 2004
Location: Pocatello, ID
Posts: 495
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

I originally cut 10 sets of cores for the F-86, molded 10 rudders and 10 speed brake sets. So there were 10 sets of the parts I made anyway. He had told me he would never sell it. No one could afford it. Rumor has it, he did sell it. or did he? It's one of the most spectacular finished models I've ever seen. I remember the first time it was at Superman. He didn't fly it then, but it made quite a showing. You simply couldn't ignore how it looked! It looks like this size airframe is going to become the common place in the future.

It's just amazing how many rumors fly around though; Hard to tell what the truth is anymore....

Dan
Old 01-17-2008, 07:55 AM
  #18  
AFTERBURNER1
My Feedback: (80)
 
AFTERBURNER1's Avatar
 
Join Date: Jun 2003
Location: Anaheim Hills, CA
Posts: 4,434
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

ORIGINAL: dbarrym

I know there were a few "kits" made up, something like 10 or so. I've recently seen two that were being geared up and have now been delivered (RTF) to the lucky new owners. Can't say any more than that (super secret squirrel promise).

From what I was told these were not really kits, per se, but rather semi-kits for experienced builders. VERY pricey. It is one awesome plane - HUGE presence.

here's a couple pics of Shailesh Patel's own F-86 from BITW 2005...keep in mind in the last pic that the shadow of the EZ-Up is about 11' square...

Barry

Looks like BITW 2004 (That thing was awesome) at the JET HATER HAS BEEN CLUB called Prado.... Who is the guy standing next to it?? Oh yeah!! The founder of the "Don't ask Don't tell" military pilot policy!!!!
Old 01-17-2008, 10:08 AM
  #19  
seanreit
My Feedback: (60)
 
seanreit's Avatar
 
Join Date: Apr 2002
Location: Cedar Park, TX
Posts: 7,434
Received 7 Likes on 3 Posts
Default RE: Shalesh Patel Sabre

I just spit coffee, that's F'ing hilarious. Buck and Don't ask don't tell.................. I'm still laughing!
Old 01-17-2008, 11:31 AM
  #20  
yeahbaby
My Feedback: (21)
 
yeahbaby's Avatar
 
Join Date: Dec 2001
Location: FT Worth, TX
Posts: 6,553
Received 58 Likes on 47 Posts
Default RE: Shalesh Patel Sabre

DEEEEEEEEEEEYYYYYYYYYYYYYYYYYYYAAAAAAAAAAAAAAAAAAA AAAMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM FFFFFFOOOOOOOOOOOOOOOOOOOLLLLLLLLLLLLLLLLLLLLLLLLL LLLLLLL

Miss you too sugar britches!!

LOL

I told Barry it would only be a matter of time. haa


ORIGINAL: AFTERBURNER1

ORIGINAL: dbarrym

I know there were a few "kits" made up, something like 10 or so. I've recently seen two that were being geared up and have now been delivered (RTF) to the lucky new owners. Can't say any more than that (super secret squirrel promise).

From what I was told these were not really kits, per se, but rather semi-kits for experienced builders. VERY pricey. It is one awesome plane - HUGE presence.

here's a couple pics of Shailesh Patel's own F-86 from BITW 2005...keep in mind in the last pic that the shadow of the EZ-Up is about 11' square...

Barry

Looks like BITW 2004 (That thing was awesome) at the JET HATER HAS BEEN CLUB called Prado.... Who is the guy standing next to it?? Oh yeah!! The founder of the "Don't ask Don't tell" military pilot policy!!!!

Old 01-17-2008, 11:35 AM
  #21  
patf
My Feedback: (4)
 
patf's Avatar
 
Join Date: Jan 2002
Location: Dallas, TX
Posts: 1,886
Received 54 Likes on 46 Posts
Default RE: Shalesh Patel Sabre

with buck "dont ask dont tell" can take on a very broad meaning
Old 01-17-2008, 11:37 AM
  #22  
yeahbaby
My Feedback: (21)
 
yeahbaby's Avatar
 
Join Date: Dec 2001
Location: FT Worth, TX
Posts: 6,553
Received 58 Likes on 47 Posts
Default RE: Shalesh Patel Sabre

we refer to as "quiet mouse...still mouse" these days

Old 01-20-2008, 08:06 PM
  #23  
bigbaggy
 
bigbaggy's Avatar
 
Join Date: May 2006
Location: san diego, CA
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Shalesh Patel Sabre

You better be packing a pair if you plan on playing with one of these.
Big everything. 5 star everything.
Old 01-29-2020, 04:13 PM
  #24  
browndognz
Junior Member
 
Join Date: Jan 2020
Location: Otaki , New Zealand
Posts: 1
Likes: 0
Received 0 Likes on 0 Posts
Default Sabres in New Zealand

Hi everyone,

I saw a old post on this forum discussing the whereabouts of the Patel Sabre kits.

Two unbuilt kits were shipped to New Zealand along with 30 other models around 2012 in a container by a kiwi returning home. The models were both liberated from storage a couple of years ago by other jet fliers and both were test flown on the same day in late 2018.

I have FU260 which is the aircraft with the olive drab wings, a korean war photo recon scheme.
FU 329 is the other aircraft here, yellow and silver colours. i cant seem to post photos on the site as Im a newbie. I will when i am able.
Anyway my aircraft is now flying and going through its large model test programme here in NZ.

Im looking for information re the plane as follows:
id like to contact Joe Grice, who built it;
I need some colour documentation for the olive drab colour scheme as its really hard to find;
Id like to make contact with any member who has or is currently flying one of these aircraft, specifically re the cg location. Mine is really nose heavy at present but the cg moves back 35mm as the tanks empty so Im interested in others findings on the best set up

Look forward to any replies

Thanks and Regards

Pete Brown
Otaki
New Zealand

Old 01-29-2020, 04:18 PM
  #25  
dbarrym
My Feedback: (47)
 
dbarrym's Avatar
 
Join Date: Oct 2003
Location: Carlsbad, CA
Posts: 1,346
Likes: 0
Received 1 Like on 1 Post
Default

Pete -

Congrats! Try contacting Buck via PM (yes, he of the "don't ask..." discussion above) and either he or BigBaggy may be able to put you in touch with Joe.

Cheers,

Barry
The following users liked this post:
jkeze (01-29-2020)

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.