RE: Futura 1.9m Build
ORIGINAL: lxfly ok, thanks As I just got back my Futura from clear coating; I updated the information on building and components on my site at http://www.rcmarket.net/xoops/module...ex.php?page=21</p> <br type="_moz" /> |
RE: Futura 1.9m Build
1 Attachment(s)
Hi, here is the belly side. Base Paint is from Sikkens, Autobase+, Colors are all RAL: red 3020, gold 1036, greyblack 7021
Regards |
RE: Futura 1.9m Build
1 Attachment(s)
wao its amazing! for the next futura, i am planning to do something like following, but still not sure how it will look like in air, may be a big hassle for a pilot to point out?
|
RE: Futura 1.9m Build
1 Attachment(s)
currently, its the famous one with little modifications!
|
RE: Futura 1.9m Build
DominicM "How long do you get on the standard Futura 2.8L tank with a P160SX? Probably not that long I would guess." [youtube]http://www.youtube.com/watch?v=RQT9nn_g33w[/youtube] |
RE: Futura 1.9m Build
20KG? http://www.rcuniverse.com/forum/js/f...spinnyeyes.gif
discussed with Ali once, and he told that P-80 is more than enough for 1.9m, flies on 3/4 throttle! So finally got 100RX with a thought that it will rock it, now lets see how it goes http://www.rcuniverse.com/forum/js/f.../msn/72_72.gif |
RE: Futura 1.9m Build
Have you maiden with the jetcat rx100?
|
RE: Futura 1.9m Build
I now have about 40 flights on my Futura with the P100RX and it is an amazing turbine. I fly at 5500 feet above sea level so I loose about 10% thrust. Even at this altitude the light weight P100 has plenty of power for the Futura
I finally got someone to take a video, so you can see what a good engine the P100 is. http://youtu.be/LqCmRqRLoqY |
RE: Futura 1.9m Build
Great performance,nice stick work!
|
RE: Futura 1.9m Build
Very nice landing..thank you for the video.
|
RE: Futura 1.9m Build
Hi guys my Futura is about ready to go although strugalling to get the CoG forward to the recomended 10mm aft of the wing tube, comming out at about 20-25mm behind the wing tube with 2 batteries in up the nose, looks like others have flown it with the C0G at 20-30mm.
My question is do you have any recomendations for surface throws Airleron and elevator specificaly before I maiden it? Paul |
RE: Futura 1.9m Build
Hi,
Maidened my Futura last week, throws as indicated in instruction and CG at about 10mm behind. Until now my only flight but no problem. One remark for starting: with the standard nose gear you may get a long distance to get up in the air and my Futura really needed a lot of HR to get from the ground. Some people advise to make the nose gear higher, so I ordered some conversion parts from IQ Hammer. Good luck for the maiden. |
RE: Futura 1.9m Build
1 Attachment(s)
Thank you Ixfly
Paul |
RE: Futura 1.9m Build
Paul
Which turbine unit? Any insights for smoke system if installed any? <br type="_moz" /> |
RE: Futura 1.9m Build
Jet Cat P100 installed, no smke system as yet, depend on all up weight as is.
Paul |
RE: Futura 1.9m Build
What all up you looking forward to with P100?
|
RE: Futura 1.9m Build
Under 12KG would be nice, once completely finished I will see how the vinyl is effecting the weight.
|
RE: Futura 1.9m Build
Mines 21 lbs.
Scott |
RE: Futura 1.9m Build
Mine is comming out at 21.2 Pounds with a CoG 20mm behind wing tube.
How does yours fly? Specifically how does it land? ORIGINAL: jetpilot Mines 21 lbs. Scott |
RE: Futura 1.9m Build
21lbs with smoke pump + smoke tank?
|
RE: Futura 1.9m Build
Thats funny cause mine was 21.2 lbs as well. Getting ready to test fly this weekend. I cg at 25mm behind wing tube. Has P100 turbine. no smoke system in mine yet.
Scott |
RE: Futura 1.9m Build
Please do let me know how you get on with it. Smoke would be good, not sure were I can put it, ill fly it for a while first then maybe.
Paul |
RE: Futura 1.9m Build
Terry & Paul,
Thanks for the updates. Require the distance you guys having between the P100 exhaust cone & Bell Mount thrust tube! Would appreciate if we may have few pics for the same. Regards, <br type="_moz" /> |
RE: Futura 1.9m Build
1 Attachment(s)
If anyone is interested I make custom smoke tanks for the small and large Futura.
Below is a photo of the 1.9M version. The tanks fit under the engine rail on each side, In the photo you can see the overflow fittings. PM me if you are interested. The first photo shows the large Futura with the Custom Fuel and Smoke tanks. The second photo is the 1.9M. |
RE: Futura 1.9m Build
Hi haisanjafri
I am away for a few days now, I will mesure it when I'm back for you, I believe that there are recomendations in the P100 manual for exhaust possition, from memory mine looks a lot like the secon pic supplied by Bill. Paul ORIGINAL: haisanjafri Terry & Paul, Thanks for the updates. Require the distance you guys having between the P100 exhaust cone & Bell Mount thrust tube! Would appreciate if we may have few pics for the same. Regards, |
All times are GMT -8. The time now is 07:02 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.