Ferrari of Jets YF-23
1 Attachment(s)
<span style="font-size: large;"><span style="font-family: Arial;">Hello one and all this is my version of the Ferrari of jets YF 23 http://www.rcuniverse.com/forum/js/f...ular_smile.gif. No its not from Mike Downs plans that are scaled up. But my own orginial version. </span>My plans are that it will be using between twin P-120-160 or if you want a rocket on wheels then twin P-200. Please do not ask me for plans as I do not have any this is being done with 3 views and some dimentions thats it. Also do not ask about about kits as I do not know what the actual cost will be too early in the project.
Invertmast (Thoms F14) check out his thread lots of information on their. He will be cutting me some bulkheads as he know what excatlly what I need and want. I do not have the tools to make them in my apt. The only current issue I have is trying to figure out what the airfoil should be. I have spoken with Thomas and give me some ideas that will be trial and error like everyone know scratch building is a process and a science. I hope to get some more info in the next couple of days so I can get started with a rough draft printed at Kinko's</span> |
RE: Ferrari of Jets YF-23
hey mike, you might want to contact Dave Mosher , he has a mold for one and its gorgous
Dave |
RE: Ferrari of Jets YF-23
1badF14,
There is a set of declassified YF-23 plans availible with, fuse cuts,cg settings, airfoil and such. I down loaded it and will look for it. Thunderchief |
RE: Ferrari of Jets YF-23
ORIGINAL: WhoDaMan hey mike, you might want to contact Dave Mosher , he has a mold for one and its gorgous Dave I spoke with dave not selling fuses nor kits but the tooling Thanks for the lead |
RE: Ferrari of Jets YF-23
ORIGINAL: thunderchief 1badF14, There is a set of declassified YF-23 plans availible with, fuse cuts,cg settings, airfoil and such. I down loaded it and will look for it. Thunderchief Thats what am basinhg my plans on gives all you need for building a flying model |
RE: Ferrari of Jets YF-23
Hi Mike, message sent
Dave |
RE: Ferrari of Jets YF-23
A few tears ago a YF 23 "Black Widow" 04, (there about) showed up at either Best of the West or Prado.I believe it was turbine powered .
IMHO .. Sleekest [8D] Aircraft ...Smooth..................SMOOTH............ Semper Fi |
RE: Ferrari of Jets YF-23
This should be fun :)
|
RE: Ferrari of Jets YF-23
Thanks Thomas
I hope so this will be killer at any Jet Fly clear the runway you about to be run over....LOL |
RE: Ferrari of Jets YF-23
ORIGINAL: uncljoe A few tears ago a YF 23 "Black Widow" 04, (there about) showed up at either Best of the West or Prado.I believe it was turbine powered . IMHO .. Sleekest [8D] Aircraft ...Smooth..................SMOOTH............ Semper Fi But like everthing in Goverment buget cups and they picked the second best one F-22 |
RE: Ferrari of Jets YF-23
1 Attachment(s)
Sleek Aircraft.....
|
RE: Ferrari of Jets YF-23
<font size="4">UPDATE....</font>
<font size="4"> I am enlarging the information I have then sending it off to get my wood bulkheads done. I will be working on several ideas. </font>
We must make sure we maintain a true and align plug. Also we must make sure we try to be able to make sure there is a lot of information on the plug, hatches. Remember there is no panel lines or rivets etc. This was state of the art. Stay tuned.... </font> |
RE: Ferrari of Jets YF-23
Yes she is. They also tried to sell the F-23. But the Navy instead went with F-18 Super Hornet
On the Navy version the aresting hook wood come out a set of inclosed doors. But then again we have the F-35 but thats another story ORIGINAL: uncljoe Sleek Aircraft..... |
RE: Ferrari of Jets YF-23
ORIGINAL: 1BadF14 F-35 but thats another story ORIGINAL: uncljoe Sleek Aircraft..... Ah c,mon tell us about the other story.;) David Hudson |
RE: Ferrari of Jets YF-23
1 Attachment(s)
Dave Mosher and his model
|
RE: Ferrari of Jets YF-23
So what ever happened to daves model? Why didn't he decide to kit it? and what size was it for?
|
RE: Ferrari of Jets YF-23
1 Attachment(s)
ORIGINAL: invertmast So what ever happened to daves model? Why didn't he decide to kit it? and what size was it for? |
RE: Ferrari of Jets YF-23
did nt he have a build thread or something here on RCU some time back?
|
RE: Ferrari of Jets YF-23
i wish this jet would have beat out the YF-22 i think it looks much better
|
RE: Ferrari of Jets YF-23
Actually Mike Downs started the project and I think after 4 years Dave purchased everything from Mike and then if I am not mistaken David has 3 proto types
ORIGINAL: Ram-bro did nt he have a build thread or something here on RCU some time back? |
RE: Ferrari of Jets YF-23
I totally agree this would have been a drastic design for the military
But then again no one has seen then Aurora or Black Mantra ORIGINAL: FenderBean i wish this jet would have beat out the YF-22 i think it looks much better |
RE: Ferrari of Jets YF-23
<font size="4">UPDATE
Went to Kinkos today and when I printed the 3 views it came out to 28" Now I need to figure out how to go from 28" to 116-120" Ok I know if I enlarge the print to 26 * 200% will give me 52" and * 200 will give me 104 but to go from 104 to 116-120 what would be the percentage [:o]</font> <font size="4">If someone know please help</font><br type="_moz"/> |
RE: Ferrari of Jets YF-23
No disrespect to your building efforts, however, i think these things and all it's cousins are some of the ugliest warbirds ever conceived. No Ferrari in the styling dept for sure. [:@]
PaulD |
RE: Ferrari of Jets YF-23
ahhh got to love opinions can always count someone here to give you a ugly one. Thats a public forum though
ORIGINAL: PaulD No disrespect to your building efforts, however, i think these things and all it's cousins are some of the ugliest warbirds ever conceived. No Ferrari in the styling dept for sure. [:@] PaulD |
RE: Ferrari of Jets YF-23
Someone can totally love one style of jet or plane while another does not
To each is own and that's cool with me |
RE: Ferrari of Jets YF-23
1 Attachment(s)
The YF-23 was pretty cool... And the Navy ATF designs were just as cool, and cooler. ;) But, it was just not meant to be... [&o]
|
RE: Ferrari of Jets YF-23
I agree the arresting hook is concealed and then retract out of a compartment.. Think of when the AF uses the drag shoot
|
RE: Ferrari of Jets YF-23
ORIGINAL: 1BadF14 <font size=''4''>UPDATE Went to Kinkos today and when I printed the 3 views it came out to 28'' Now I need to figure out how to go from 28'' to 116-120'' Ok I know if I enlarge the print to 26 * 200% will give me 52'' and * 200 will give me 104 but to go from 104 to 116-120 what would be the percentage [:o]</font> <font size=''4''>If someone know please help</font><br type=''_moz''/> 1.- Divide the desired wingspan by the drawing original one -in the same units, of course- and check the result. 2.- If the result is higher than 1.00, you need magnification as follow: every unit added to the 1 equals to 100% and then you have to add the two decimals to that figure as tens and units. In your actual case you need from the originak drawing to your desired wingspan 120/28 = 4.29, this is 3 units over 1 and then 29 as decimals making a total magnification of 329%. 3.- If the result is smaller than 1.00, you need reduction as follow: substarct to 100% the two decimals as tens and units. For example, if you get 0.65 that equals to a 100-65 = 35% reduction. Please, bear in mind not every copying/resizing machine work with a floating or free magnification/reduction value and it is possible you may need playing a little with actually available values till finding the best option for getting the dessired size. For the final sizes you comment the value should be: 120/104 = 1.15 or 15% magnification as a porcentage. Hope this helps you. Finally a last word regarding different spellings we have, at least, in Spanish lenguage but think that also is appropriate for English: It is just not the same magnifiying a 200% (the copy is 3 times the original size) than magnifiying to 200% (the copy is just 2 timer the original size). Best Regards, Jesus Cardin |
RE: Ferrari of Jets YF-23
i never liked http://www.rcuniverse.com/forum/js/f...ngry_smile.giffaces. but i like the http://www.rcuniverse.com/forum/js/f...sn/biggrin.giffaces and that yf23 looks nice but thats just my opinion
ORIGINAL: FenderBean ahhh got to love opinions can always count someone here to give you a ugly one. Thats a public forum though ORIGINAL: PaulD No disrespect to your building efforts, however, i think these things and all it's cousins are some of the ugliest warbirds ever conceived. No Ferrari in the styling dept for sure. [:@] PaulD |
RE: Ferrari of Jets YF-23
Good walkaround pics in these 3 pages ;)
http://data.primeportal.net/hangar/howard_mason4/yf-23/ http://i145.photobucket.com/albums/r...22__small_.jpg |
RE: Ferrari of Jets YF-23
Sonnich Johannesen
Thanks for the link that will come in handy when I detail out the YF23 John Travis I agree with you and like I said some may not like the YF23 just like some may not like the P51 But that's my opinion<br type="_moz"/> |
Old thread I know...but did anything ever traspire from this? If so, I'd love to see the pics...as we all would! :)
|
I have a small foamy version( Lanxian model) who fly very well on 6S and 2 70 mm fan. I love the shape of this elegant plane, mine is small and you have to be 100% on , sometime very hard to see....
|
All times are GMT -8. The time now is 07:29 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.