RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Mark Frankel's LEARJET 35A build (https://www.rcuniverse.com/forum/rc-jets-120/10980885-mark-frankels-learjet-35a-build.html)

Furyflyer2 02-28-2012 08:38 PM

Mark Frankel's LEARJET 35A build
 
I picked up a partially built Mark Frankel's LEARJET 35A from Mark Frankel, so after looking for a build thread on one and not finding one, I figured I would do one. This learjet is a 35A version, fiberglass fuse and foam covered wing, stab and tail. I'm making it turbine powered. Right now I'm working on the tail and will post pics as I go along, I'm planing on making this a very scale build, so stay tune.

smchale 02-29-2012 05:00 AM

RE: Mark Frankel's LEARJET 35A build
 
Subscribed! [8D]
Currently building the 31A version of the same model. I'll watch your thread and look forward to seeing yours come together.
Btw, it was nice meeting you at the WRAM show.

Furyflyer2 02-29-2012 08:14 AM

RE: Mark Frankel's LEARJET 35A build
 
Same here if you could can I get a copy of the photos you have? email me at paul @ 3dxhobbies.com .

Furyflyer2 02-29-2012 09:23 PM

RE: Mark Frankel's LEARJET 35A build
 
1 Attachment(s)
Here are some pics.

Furyflyer2 02-29-2012 09:28 PM

RE: Mark Frankel's LEARJET 35A build
 
1 Attachment(s)
Making lots of progress, getting close to mounting the vertical fin.

smchale 03-01-2012 03:47 AM

RE: Mark Frankel's LEARJET 35A build
 

ORIGINAL: Furyflyer2

Making lots of progress, getting close to mounting the vertical fin.
Nice progress Paul!
I found it helpful to glass and prime/sand the stab and fin before mounting them together and on the fuse. They are a lot easier to work with off the fuse. Also, mounting the wing will help as a reference point to align the fin/stab.
Those carbon former parts look really nice. I manually cut mine from G10. :eek:


All times are GMT -8. The time now is 10:05 PM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.