Global Jet Club New RCU Forum
 

http://www.rcuniverse.com/forum/atta...mentid=1928288

Dear customers and members of Global Jet Club:

To improve our services, we have just established a new RCU support forum exclusively for Global Jet Club's products and services.

It's located right inside RC AIRPLANES, 2 forum above RC Jets. Please click on this link

http://www.rcuniverse.com/forum/glob...-supports-531/

Please feel free to subscribe and to create a thread discussing our products and technical issues. We will use this forum to make new product announcements, notice to airmen, building tips, flying set up etc. Most importantly, we want to hear your voice, opinions, suggestions, praise, "hopefully no bashing" from you.

Look forward to serving you in the RC Jet community.

Regards,

Mike Deni Lin
Founder/Adviser

I have built the F89 from Air C Race and the product is as good as it gets, the finish and total package is great, the servo boxes are all pre installed there is very little to do to get airborne . I have to congratulate Mike for getting these products from ACR.

On a second note I have just finished the new Jetlegend F16 with rivet detail this is as USA supplied by GJC and oh boy what a plane! I have had many F16 but this is the best ,
see other thread,

http://www.rcuniverse.com/forum/rc-j...16-rivets.html

Mike great products thanks.

Good news Mike. I can confirm that Mark's V2 JL F16 flies superbly. A 1/6 scale F16 weighing only 12.5kg! Amazing.

26lbs? is that the weight ready to fly or just the weight of kit?

Ready to fly but without fuel load!

Hi Andy and Mark

http://www.rcuniverse.com/forum/atta...mentid=1928440

Too bad we are not able to see this Yak flying at Jet Power due to new weight restriction.

Mike

Thats amazing, dont see how thats even possible, the lightest I have seen were low 30s.

Yes, my G1 version weighs 29lbs and it even has functional operation canopy and air brake. Mike