Feibao 1/7 scale F15E
 

Anyone flying one of these with twin engines willing to share some pics of engines installation? thanks in advance!

Hi Marcio,

I'll be interested to see the pics too. I am doing a build on one with a single (I had ordered it with both single and twin mounts, and "wimped out"). I am going with a P-200. Mine is done with a yellow/brown/black Japanese scheme .. from a D-model, so technically a fantasy scheme I guess.

How far along are you with the build? If you like I can share some pics of what I have have been doing, or perhaps start a single engine build thread and leave this one to you and the twin motor gang :-)

Dave McQ

http://www.rcuniverse.com/forum/rc-j...-video-11.html

Follow the link. You'll find good info on single set up

So far I've hinged all flying surfaces, installed flying surfaces servos and horns. Lubricated all cylinders on all doors. Checked main gears and lubricated main gear cylinders with bvm o ring oil. It was very dry. I'll have 2 kingtech 140G in mine. Can’t wait.

here is some help

Great work Mario! Thanks for the pics.

Should have mine in a month or so. Will be going single K210 for a little while then the new K300 should be ready :)

Awesome! K300 ? Sweet!

You must be planning to do like the F-16, throw all the goodies on it? Which I must say was a totally awesome jet, nothing sweeter than a scale jet will all the tanks!
Here is my F-15 build thread I did a twin also and I have a bunch of videos on my youtube channel as well.

Yep :) going to go crazy on it. Even thinking about cutting the inlets off and rebuilding them to make them functional and move :) Will hang everything off it and probably make the bombs droppable on the belly. Will try and figure out a way to make hidden linkages on the rudders. Will also do lots of other scale goodies like add inside detail under the grills in some areas. Cant wait to get started!!

Look forward to your build Braza. Get some pics if you can. The new ones are allot different then the old ones from what I hear.

Sure i'll post some pics tonight.

I'm building one now. I'm installing a single P240 in it. Was hoping to maiden at KY jets but didn't make it. It will be ready in a couple of weeks. I'm also hanging everything off of it.

Gonna try to make mine look like this.http://www.rcuniverse.com/forum/atta...mentid=2109221

and this baby still going strong

Have the problems with the landing gear been resolved with the FB F-15?

1 more

http://www.rcuniverse.com/forum/atta...mentid=2109251http://www.rcuniverse.com/forum/atta...mentid=2109252http://www.rcuniverse.com/forum/atta...mentid=2109253http://www.rcuniverse.com/forum/atta...mentid=2109254http://www.rcuniverse.com/forum/atta...mentid=2109255http://www.rcuniverse.com/forum/atta...mentid=2109256http://www.rcuniverse.com/forum/atta...mentid=2109257http://www.rcuniverse.com/forum/atta...mentid=2109258http://www.rcuniverse.com/forum/atta...mentid=2109259http://www.rcuniverse.com/forum/atta...mentid=2109260http://www.rcuniverse.com/forum/atta...mentid=2109261http://www.rcuniverse.com/forum/atta...mentid=2109262http://www.rcuniverse.com/forum/atta...mentid=2109263http://www.rcuniverse.com/forum/atta...mentid=2109264http://www.rcuniverse.com/forum/atta...mentid=2109265http://www.rcuniverse.com/forum/atta...mentid=2109266http://www.rcuniverse.com/forum/atta...mentid=2109267http://www.rcuniverse.com/forum/atta...mentid=2109268http://www.rcuniverse.com/forum/atta...mentid=2109269http://www.rcuniverse.com/forum/atta...mentid=2109270http://www.rcuniverse.com/forum/atta...mentid=21092711 more

Cool Pics Mario. Thanks!

Mounting engine...http://www.rcuniverse.com/forum/atta...mentid=2109272http://www.rcuniverse.com/forum/atta...mentid=2109273

Trying to decide on wich afterburner kit to use. What are you guys using?

Pretty sure I am going to go with the Unilite system. It has the best looking rings IMO with the light diffuser ring. Also they make a kit for F15 lights.

Thanks! I've been considering using the unilight.

Braza how is the build going? Just found out mine will be done this month and shipping to me so I can get started. What are you going to use for retract valves? Post more pics if you can. Getting pumped up for mine now lol.

It's going well. Been kind busy at work and haven't done much for the past week. Wings are done, engine and pipes are mounted. Fuel cells installed and smoke tanks as well. I'll post some pics when I get a chance. I'll be using jetronics valves with Jet central sequencer for gear, doors and working canopy.