dx 18 sequencer issue
 

changing a few things and I can not get x1 or x2 to work at all
on a particular model.( on the servo monitor)
x 1 is labeled on the servo monitor as x and x2 is labeled a s3b
I assume a sequencer function how do I disarm this it is a pia...
I have gone to the sequencer menu and all switches are deactivated.
x1 and x2 on the setup screen are labeled to the rotary knob adb b switch.
lost here. I don't want to start a whole new setup on this f4 it was a bear to trim.