RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   JR AXIS XBus gyro (https://www.rcuniverse.com/forum/rc-jets-120/11622489-jr-axis-xbus-gyro.html)

tp777fo 10-07-2015 06:22 AM

JR AXIS XBus gyro
Anyone flying this thing? Comments. Just got a JR XG 14 and was looking to change to this to keep jet all JR. Will be using 2 731BX Rx's (redundant Rx's) with telemetry and the 14 port duo redundant bus pwm converter on my FB Dolphin. I have had no major problems with my DX18 Stealth but the stories of them just quitting really scares me.

jayman618 10-07-2015 03:54 PM

I am going about it a little differently. I will be using the pwm ports on the main receiver that I need,then coming out of the axis xbus for flight surfaces using the http://www.jramericas.com/images/P/I...250x250-35.jpg[h=1]XBUS XB2-CHB HEAVY DUTY DUAL REDUNDANT X BUS CENTER HUB [/h]

jetpilot 10-07-2015 04:06 PM

Don't get me lying, but I think the JR axis will not work through the DUO.

binsonc 10-07-2015 04:34 PM

yes it work with duo i will upload my hook up later tonight.

spike5150 10-08-2015 08:20 AM

I have several planes set up with AXIS gyros now and they are great. The AXIS takes control of the surface channels and outputs either through the PWM ports or the XBUS out. It only supports digital servos unless you use a CV harness. You would have to plug the axis into the XBUS out port on the DUO. The AXIS does not have single channel inputs, only XBUS for input. If you are looking for high current support for the surface servos, the DUO is not going to do it without some creative wiring. You could use the XB1-PC4 and plug the deans connector into the high power output of the DUO and plug the xbus connector into the output of the AXIS. Or just a PH4 harness if you plan to use XBUS servos.

tp777fo 10-09-2015 06:52 AM

I think the AXIS would work if you put it between the 731 Xbus out and the DUO Xbus in. I might not be able to use redundant RXs in this set up. If so I will use my Cortex after the DUO as per normal setup.

spike5150 10-09-2015 07:08 PM

1 Attachment(s)
This is how you could do it

All times are GMT -8. The time now is 03:29 PM.

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.