It's coming! Skymaster F-18 1/6 on 2016
3 Attachment(s)
Hi, all F18 fans
We are finally finished the airframe of the F-18f 1/6.25 and we will make the more test fly as soon and the F-18D 1/5.75 will finish on next Month, Specs: F-18 E/F 1/6.25 scale Length: 117" (2970mm). Wingspan: 85.8'' (2180mm). Power: 17~24Lbs x2 (8-12kg x2) or Single18kg thrust up http://www.rcuniverse.com/forum/atta...mentid=2140135 http://www.rcuniverse.com/forum/atta...mentid=2140136 scale Landing gear http://www.rcuniverse.com/forum/atta...mentid=2140137 scale flaps |
|
4 Attachment(s)
|
|
|
Ready and waiting ... ;) :)
|
Good looking Bird can't wait to see the C model
|
Originally Posted by EDFJim
(Post 12157454)
Ready and waiting ... ;) :)
|
Hello Anton,
I'm looking for instructions on your website for this model, I see the 1/8 instructions but not the 1/6th Regards |
Cool no tail pipes? Engines appear to go in the back.
|
Originally Posted by yeahbaby
(Post 12157456)
Good looking Bird can't wait to see the C model
|
Originally Posted by pilot tw
(Post 12157424)
Hi, all F18 fans
We are finally finished the airframe of the F-18f 1/6.25 and we will make the more test fly as soon and the F-18D 1/5.75 will finish on next Month, Specs: F-18 E/F 1/6.25 scale Length: 117" (2970mm). Wingspan: 85.8'' (2180mm). Power: 17~24Lbs x2 (8-12kg x2) or Single18kg thrust up http://www.rcuniverse.com/forum/atta...mentid=2140135 http://www.rcuniverse.com/forum/atta...mentid=2140136 scale Landing gear http://www.rcuniverse.com/forum/atta...mentid=2140137 scale flaps |
Nice work!
Not as much of a fan of the E/F .. waiting with great anticipation for the C model too! Dave |
I'm with them. Bring on the C. Outstanding work Anton. Congratulations.
|
I'm also waiting for the C! Looking forward to it!
|
Originally Posted by Alkaline
(Post 12157621)
Cool no tail pipes? Engines appear to go in the back.
|
If I didn't already have this Fej 1/6 F-18 clunker....:mad:
You guys enjoy the 120s seem to push it very nicely. I hope they release a light kit for it with factory install like on the hawk and f16 |
Originally Posted by FalconWings
(Post 12157629)
down boy, down!
|
2 Attachment(s)
we had designed the 3 versions for the engine mounts , one for single turbine P-180 to P-200 or K-180 to K210 , and two versions for twin turbines P-100 (K120) in the tail or twin P-140 (K140) in the center place ,
http://www.rcuniverse.com/forum/atta...mentid=2140260http://www.rcuniverse.com/forum/atta...mentid=2140261 |
Originally Posted by pilot tw
(Post 12157908)
we had designed the 3 versions for the engine mounts , one for single turbine P-180 to P-200 or K-180 to K210 , and two versions for twin turbines P-100 (K120) in the tail or twin P-140 (K140) in the center place ,
http://www.rcuniverse.com/forum/atta...mentid=2140260http://www.rcuniverse.com/forum/atta...mentid=2140261 |
the Likai will get the two K160 (new small size) and new F18f airframe then install the new K160 to tail without tailpipe for test the new airframe of F-18f that Likai made some improved it in Skymaster factory last month, we will start products the new F-18E/F for all customers !
|
Subscribed.waiting with interest.
|
Originally Posted by pilot tw
(Post 12157983)
the Likai will get the two K160 (new small size) and new F18f airframe then install the new K160 to tail without tailpipe for test the new airframe of F-18f that Likai made some improved it in Skymaster factory last month, we will start products the new F-18E/F for all customers !
Great work on the F18. See you at FLjets in a few months |
Gun whats the specs on the K160 im guessing the size will be the same as 140 but what about thrust?
|
All times are GMT -8. The time now is 10:03 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.