new smaller (composite) Sebart Avanti XS
With the announcement that JRAmericas is now the official importer for Sebart (shifting from Jason at SebartRC in Las Vegas), they also are showing a smaller version of the 2m Avanti S
http://www.jramericas.com/sebart/ [h=4]Avanti XS 1.8m/71" (1.9m/75" long) 120mm EDF or 60-100N Turbine Jet ARF (Composite Fuse)[/h]$1999 with landing gear $1499 without landing gear That means they now offer the balsa/built up Mini (P20 size), the new composite fuse XS (60-100), the composite fuse 2m S and the XL version (from Skymaster) |
Looking forward to seeing it.
|
Originally Posted by DrScoles
(Post 12200029)
Looking forward to seeing it.
|
Originally Posted by DrScoles
(Post 12200029)
Looking forward to seeing it.
http://www.modelarstvoimi.sk/avanti-...odukt/9267/410 http://remotejets.com/turbine-modell...avanti-xs.html https://www.lindinger.at/en/detail/i...rticle/9728482 available end or May? |
2 Attachment(s)
Fantastic new jet with amazing tank !!!
Regards from Spain Carlos www.cmjets.com http://www.rcuniverse.com/forum/atta...mentid=2156539 http://www.rcuniverse.com/forum/atta...mentid=2156540 |
Ordered, or at least on the pre-order list...
|
Vectoring thrust available?
|
Its a beautiful model and size for sure! Im adding it to the top of my must have list :D
|
Originally Posted by cmjets
(Post 12200099)
Fantastic new jet with amazing tank !!!
Regards from Spain Carlos www.cmjets.com http://www.rcuniverse.com/forum/atta...mentid=2156539 http://www.rcuniverse.com/forum/atta...mentid=2156540 |
2.8l
|
looking forward to see one!
Hope the gears are of better quality then on the mini avanti, or is seba gonna use his customers again as "in field paying gunny pigs" ?? |
oops wrong post.
|
Your not understanding. There is now a FOURTH size. The 1.8m ws.. composite that takes a 60-100n engine.
The price for this is 1999 with gear |
Will be watching this one closely!
|
Any news as to when this one will be available?
|
Not for the foreseeable future if your in Australia :(. The Australian importer of Sebart won't be importing this model :mad::mad::mad:.
|
Subscribed. I wonder how this airframe would handle a Kingtech k-120.
|
Originally Posted by luge_racer
(Post 12210664)
Subscribed. I wonder how this airframe would handle a Kingtech k-120.
Exactly my thoughts :rolleyes: Hope they put more effort in the wing's as with the mini, especially the gear mounts, on the mini you can really see the cheap China labour unfortunately :( |
Midas D,
The Avanti XS is coming out of a different factory than what the original and mini come from so quality of the gear mounts is yet to be seen. The different factory is the reason why the Australian importer isn't getting any apparently. |
The firts models come in July, Aprox.
In every case at Jetpower it will be in stock at stand of SebArt !!! Regards from Spain Carlos www.cmjets.com |
So I see a fuel tank is available, but does anyone know if someone is making a pipe for it? And possibly a website for said pipe?
|
I wonder how a K70 would fly this?
|
2 Attachment(s)
I fly mine with a P100 it is a very lite air frame .. I fly from some thick grass and the 100 helps on take off . \Not a fsat jet but great vertical and slows down to a crawl to land
|
I have a Merlin 100 XBL in an Avanti XS BWG back in Canada, and I am outfitting one here in Hawaii (Frecce Tricolori scheme) with a JetCat P-100 too. My sense of the thing is if you fly from asphalt or other hard surface then a 70 will be fine, though somewhat vertically limited as this is a 17 Lb aircraft without fuel, but if you fly from grass then I’d use either an 85 or a 100.
Len |
I’m flying mine with a vt80 from grass and It’s a great match. It’s super light and lands very slowly....great club jet.
|
All times are GMT -8. The time now is 05:53 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.