RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Kingtech presents the all new T1 sports jet (https://www.rcuniverse.com/forum/rc-jets-120/11630686-kingtech-presents-all-new-t1-sports-jet.html)

TonyBuilder 08-07-2016 04:43 PM

Mine should ship next week, I got a custom paint job.

TB

marquisvns 08-07-2016 07:34 PM

1 Attachment(s)
Hi Everyone,

Here's something you might also want to do in case if your servo bracket is somewhat loose. The little black dot right by the strut is a set screw, drilled and tapped to pin down the steering servo bracket.

Cheers,
Barry

http://www.rcuniverse.com/forum/atta...mentid=2176161

DMichael 08-08-2016 05:12 AM

Tony - did you submit your own scheme or did you order one of the two custom schemes on the skymaster usa website? If you submitted your own what is the cost?

TonyBuilder 08-08-2016 05:47 AM


Originally Posted by DMichael (Post 12244064)
Tony - did you submit your own scheme or did you order one of the two custom schemes on the skymaster usa website? If you submitted your own what is the cost?

I picked one off the website but you can submit your own $400

TB

erh7771 08-08-2016 02:52 PM

Pray tell

- how long is the thrust tube for this model?

- what are the intake dimensions

Thx in advance for any input

Regards

Wclays 08-08-2016 05:18 PM

I will have mine at Waco. Just got info that it has shipped

Clay

TonyBuilder 08-08-2016 05:28 PM


Originally Posted by Wclays (Post 12244297)
I will have mine at Waco. Just got info that it has shipped

Clay

Lucky you, I'm hopping mine will ship so I can have mine for Waco :rolleyes:

TB

Stratotanker 08-09-2016 10:22 AM

myersflyers,

The lettering is painted on. Sorry for the late reply.

Chris

Helijet 08-09-2016 05:15 PM

Oops...anyone else NOT get the retracts or was it just my kit???

D.W.

marquisvns 08-09-2016 05:17 PM

The retracts will be sent separate from the airframe.

Thanks,
Barry

TonyBuilder 08-09-2016 05:18 PM

^^^^^^^^^

I thought I heard they were shipping separately, but I could be wrong.


TB

Helijet 08-09-2016 05:21 PM

OK..no worries...may have missed that post.
In the meantime, I may have to eye a new Kingtech 120......!!!!

D.W.

gunradd 08-10-2016 03:33 PM

Started working on the gear doors. Will post more pics how I did it tomorrow after the hysol dries. They sent me one extra gear door so I cut that up and used it to cover the retract.

TonyBuilder 08-10-2016 04:15 PM


Originally Posted by gunradd (Post 12245053)
They sent me one extra gear door so I cut that up and used it to cover the retract.

I want an extra gear door. :rolleyes:

TB

sysiek 08-10-2016 04:54 PM

Do you guys will have the eurofighter jet and maybe some other scale jets ? What is the next in line from T1? Thanks.

marquisvns 08-10-2016 04:58 PM

1 Attachment(s)
Hi guys, I decided to add an extra anti rotational pin at the trailing edge of the vertical fin. The prototype Kris and I had out at Kentucky had a breach of integrity at the vertical fin spar clamp bulkhead, this was from the power of a K-170 pushing through a violent snap roll, since then the factory increased the thickness of the bulkhead and improved hysol mixing ratio, plus a bead of carbon fiber in place.

http://www.rcuniverse.com/forum/atta...mentid=2176451

Regards,
Barry

marquisvns 08-10-2016 05:00 PM


Originally Posted by sysiek (Post 12245088)
Do you guys will have the eurofighter jet and maybe some other scale jets ? What is the next in line from T1? Thanks.

We sure will, besides the EF, a large F-22 is in the making at a 1/7 scale about 106".

Regards,
Barry

sysiek 08-10-2016 05:05 PM

Maybe some f-22 pictures and do you think the will make bigger eurofighter than the one little smaller than c-arf ,and if the f-22 will be single or twin turbine or both versions.thanks.

marquisvns 08-10-2016 05:43 PM


Originally Posted by marquisvns (Post 12245091)
Hi guys, I decided to add an extra anti rotational pin at the trailing edge of the vertical fin. The prototype Kris and I had out at Kentucky had a breach of integrity at the vertical fin spar clamp bulkhead, this was from the power of a K-170 pushing through a violent snap roll, since then the factory increased the thickness of the bulkhead and improved hysol mixing ratio, plus a bead of carbon fiber in place.

http://www.rcuniverse.com/forum/atta...mentid=2176451

Regards,
Barry

By the way, wanted to thank the Venezuelans for all the help, not only they are excellent pilots, these guys really know their stuff around a jet. Without Franco, Leopoldo and Fajardo, Kris and myself couldn't make the T-1 look half as good.

Regards,
Barry

marquisvns 08-10-2016 05:45 PM


Originally Posted by sysiek (Post 12245094)
Maybe some f-22 pictures and do you think the will make bigger eurofighter than the one little smaller than c-arf ,and if the f-22 will be single or twin turbine or both versions.thanks.

The raptor is only at its designing stage, probably both versions will be available.

Regards,
Barry

marquisvns 08-10-2016 06:01 PM

4 Attachment(s)
Ronnie Derhacopian did an excellent job on these doors...
http://www.rcuniverse.com/forum/atta...mentid=2176457http://www.rcuniverse.com/forum/atta...mentid=2176458http://www.rcuniverse.com/forum/atta...mentid=2176459http://www.rcuniverse.com/forum/atta...mentid=2176456

An aluminum L bracket, using the clamp that it comes with, and with a bit of shimming, fits perfect!

Regards,
Barry

i3dm 08-11-2016 12:48 AM

are you guys using a servo or air cylinder for the nose door?
some pictures would be great.
thanks.

smiller 08-11-2016 07:31 AM

I am very interested in the EF 2000. Would like a nice scale version of the single seater. My Ferrari T-one is in paint, can't wait to get it.

Scott

Stratotanker 08-11-2016 08:11 AM

Stay tuned as I will be developing one of my custom maintenance/transport cradles this weekend. More to come.

Chris

rcpete347 08-11-2016 02:29 PM

7 Attachment(s)
Well boxed.http://www.rcuniverse.com/forum/atta...mentid=2176544http://www.rcuniverse.com/forum/atta...mentid=2176545http://www.rcuniverse.com/forum/atta...mentid=2176546http://www.rcuniverse.com/forum/atta...mentid=2176547http://www.rcuniverse.com/forum/atta...mentid=2176548http://www.rcuniverse.com/forum/atta...mentid=2176549


All times are GMT -8. The time now is 02:01 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.