11 Attachment(s)
"Jet Rebel" was flying his at "Classic Jets" on Friday, looks really nice.
Alistair |
Originally Posted by ExFokkerFlyer
(Post 12230546)
Nice! Could be a game changer. Will they be stocked in SoCal for local pick-up?
Tom M On shipping I think ems shipping on the bird is about $300 to your door. But need to get more accurate info on shipping |
6 Attachment(s)
And a couple more.
Alistair |
Please see the attached link to some video taken on Friday at Classic Jets. Big thanks to Dominic of "Essential R.C."
Alistair https://www.youtube.com/watch?v=IgxJZ686gbE |
1 Attachment(s)
I like the split nose door on the one in the video. Anyone got pics of their nose door install?
I had to shave a little of the horizontal stab spar tubes. Mine stuck out to far and could damage the pipe. Minor adjustment. People building these need to take care and not have any loose servo wires that can lay on the pipe. [ATTACH]2171079[/IMG] |
Hey kingtech guys. Tried sending several messages to Barry and calls but no return. What schemes will be on the first shipment so i can pick and send money asap to get one.
Johnny 3054399999 |
Johnny, we were in touch a couple of occasions, Mr. Kim at T-one Models is still finalizing paint schemes for our website, along with Dirk setting up company for bank accounts. A link to place orders will be generated in due time, please be patient.
Kris, thanks for the thread, look forward of some stick time in KY! Regards, Barry |
Gentlemen,
Due to the overwhelming inquiries, At this time we will be shipping the planes DHL straight to your doorstep. The Factory has committed 12 units for us to sell at this time and will be ready for paint any day. They are not geared up to supply us with a complete container at this time, but will in the future and we will warehouse them here in California. Local pickup will be available as well. We are taking full payment at this time, as we only have 8 left to sell of the 12. The jets will be ready in just a few weeks as soon as I commit to the paint schemes to the Factory. Please email me at [email protected] and let us know the paint scheme you want to order. We have Thunderbirds, Ferrari, Yellow, Green, Blue, Orange and Red available at this time. I will reduce the count as I get committed purchases so don't hesitate or you will have to wait until the next batch is ready. Cost is $1760 plus $300 DHL shipping to your door, please write check to: Skymaster USA 289 S. Santa Anita Ave. Pasadena, CA 91107 Now that the cat is out of the bag, Barry and myself are also a Skymaster Jets Dealer and we have a container of planes being built. Skymasterusa.com is currently under construction and will be up soon. Please don't hijack this thread with Skymaster USA inquiries as a new thread can be started for that. Best Regards, Skymaster USA Dirk Flejter 626-808-6122 |
Well this is great timing. I was about to pull the trigger on a new Ultra Flash after selling my Pilot Dolphin but this is just too good a deal to pass up.
Pm sent Dirk Hope to have this puppy ready for action at this Sept. Princeton Jet Rally! Dean W. |
Originally Posted by Helijet
(Post 12231664)
Well this is great timing. I was about to pull the trigger on a new Ultra Flash after selling my Pilot Dolphin but this is just too good a deal to pass up.
Pm sent Dirk Hope to have this puppy ready for action at this Sept. Princeton Jet Rally! Dean W. You wont be disappointed Dean! Its a very nice bird. It should cost allot more in my opinion with the quality it has. Painted out side the mold is a big one for me. Just makes it look so much better with no seam lines. But the down side is it takes them longer to manufacture. |
Nice!
|
Wish I needed another sport jet. Looks great, nice price, and having Barry backing it means great customer service.
|
No worries Mike. A little stick time on mine and I'm sure you'll need to have another one...lol
Dean |
I'm trying to reduce the number of toys Dean! I'm not a psychologist, but owning eight jets might be the start of a problem...
|
Mike, its the start of a solution :)
|
Originally Posted by gunradd
(Post 12231670)
You wont be disappointed Dean! Its a very nice bird. It should cost allot more in my opinion with the quality it has. Painted out side the mold is a big one for me. Just makes it look so much better with no seam lines. But the down side is it takes them longer to manufacture.
Kris, does the price include gear, tank and pipe? |
Originally Posted by Bob_B
(Post 12231764)
Kris, does the price include gear, tank and pipe?
|
Whoooooohooooo!
Blue one ordered and bank draft sent! Looking forward to this sport,,,she's preeeeeetty! D.W. |
Originally Posted by gunradd
(Post 12231773)
Yes Bob 1760 includes pipe gear and tank. Its a real bargain.
|
Farrari ordered, going with a K120, stoked to get this bird in the shop.
TB |
Gentlemen,
Only 5 left!! I am checking to see if the factory can allocate me more than the 12 from the first run. I will continue to take orders for the next batch but we will not ask for payment until they are ready to be shipped. Remember, just because you emailed and asked a question does not confirm you placed an order. I need an email saying "I am sending you a check for a T-1" I also need your ship to address and a phone #. Regards, Dirk & Barry |
now 4
|
Hey guys, what strength servos are you using in this jet? I have some HS-7954SH servos that I can use but I might go all SBus on this one!
Thanks TB |
Im using 20kg/cm.
Works great. Your hitecs will be fine. |
Originally Posted by i3dm
(Post 12232029)
Im using 20kg/cm.
Works great. Your hitecs will be fine. TB |
All times are GMT -8. The time now is 10:23 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.