Originally Posted by kevinthoele
(Post 12232661)
Yes Buck it said gear tank and pipe $1760
|
Buck
Jump on board. At that price how can you go wrong. I got one. Yeah baby:cool: |
Nice work amigo!! Look forward to seeing it in November at Mesa. Peggy's are big motors amigo, I need to confirm space available. And 100 oz is about 5 min for that fire breather, so need to see if space available for addutional saddle tanks or gear long enough for centerline drop tank. Great price no doubt.
|
Will spare parts be avelible here in the us, tires mostly?
Thanks TB |
Vettster,
Yes, It can be shipped VIA DHL straight to Canada as I have already sold 2 to your fellow Canadians. The plane comes with Gear & Brakes, Thrust tube, Fuel cell and hardware. The DHL mailed kits WILL NOT come with the air tanks, as they are banned from shipping and will be taken out at customs. We are looking into having them shipped to us separately and we will try to disburse them to our customers. At this time though, they will not have air tanks included!!! We have sold our allocated 12 but was told to keep sending sold orders as other countries might not be selling their allocation and we can sneak theirs. If they can not keep up with our demand we are looking at a 6-8week build, paint & ship time frame. We will notify you that you were put on the build list and will give you opportunity to cancel the order or keep it. We will not cash your check until it is ready to ship. Regards, Dirk & Barry |
Tony,
We are looking into keeping spare parts on hand in the future. Keep in mind, the factory will be fulfilling the sold orders as a priority and will supply us with parts when sales relax a bit. I'm sure you know our Customer Service at KingTech has always been a high priority to Barry and Myself and we will keep our same standards with the T one models and Skymaster products. Regards, Dirk |
Thought so, thanks Dirk.
TB |
1 Attachment(s)
Originally Posted by yeahbaby
(Post 12232703)
Nice work amigo!! Look forward to seeing it in November at Mesa. Peggy's are big motors amigo, I need to confirm space available. And 100 oz is about 5 min for that fire breather, so need to see if space available for addutional saddle tanks or gear long enough for centerline drop tank. Great price no doubt.
http://www.rcuniverse.com/forum/atta...mentid=2171981 |
Hello, Where to buy one bird?
|
Originally Posted by gunradd
(Post 12232744)
Buck here is a pic for you. This one has a K170 installed. I did have to trim the mounts a bit to shoe horn it in.
http://www.rcuniverse.com/forum/atta...mentid=2171981 |
acabrera11,
I replied 2 times to the PM you sent me. I guess it never went through. Please email me at, [email protected] and let us know the paint scheme you want to order. We have Thunderbirds, Ferrari, Yellow, Green, Blue, Orange and Red available at this time. Cost is $1760 plus $300 DHL shipping to your door. Please write your check for $2,060.00, payable to: Skymaster USA Mail your check to: Skymaster USA 289 S. Santa Anita Ave. Pasadena, CA 91107 |
looking forward to picking one of these up. I read that there were some recommended updates. Will they be on the next batch?
|
Originally Posted by jonkoppisch
(Post 12232811)
looking forward to picking one of these up. I read that there were some recommended updates. Will they be on the next batch?
|
2 Attachment(s)
OK the T1 is complete accept installing an xplus for the extra channels. Smoke system is all installed also.
Here is the cg and weight.. This weight is with a little fuel also because I just ran it. Has UAT full and about an inch in the main tank. She came out a little tail heavy even with everything up front but not much. I added a little weight to the nose. I see the flash messed up the pic. Its 28.28 pounds http://www.rcuniverse.com/forum/atta...mentid=2172049 http://www.rcuniverse.com/forum/atta...mentid=2172050 |
which CG did you end up with, measured back from leading edge root?
|
Originally Posted by yeahbaby
(Post 12232751)
thanks amigo, that Peggy is a big ol girl and I think slightly larger than 170. can't wait to see Clays in a few months, I'm hoping he ordered the red one. Beautiful scheme
|
Originally Posted by i3dm
(Post 12232962)
which CG did you end up with, measured back from leading edge root?
|
Originally Posted by gunradd
(Post 12232973)
I used your cg 210mm back from leading edge.
|
Originally Posted by roydefiant
(Post 12230106)
what size turbine?
|
Does the Ferrari scheme come with all the decals? Has anyone tried this plane on a grass runway?
|
Originally Posted by kelly vallee
(Post 12232991)
Does the Ferrari scheme come with all the decals? Has anyone tried this plane on a grass runway?
|
What servos you JR Spektrum guys planning on using? I have a full set of 8411's but was told maybe the T-One could benefit from a little more torque on the elevators and flaps. 8611A maybe? What are your thoughts
|
Use your 8411s. This aircraft is a mid sized jet and does not need servo overkill.
You will be perfectly fine. Dean W. |
So we are looking at a total of 7 servo plus 1 servo for front wheel?
|
And air retract servo! 9 total
TB |
Originally Posted by Helijet
(Post 12233126)
Use your 8411s. This aircraft is a mid sized jet and does not need servo overkill.
You will be perfectly fine. Dean W. |
Originally Posted by jason
(Post 12233148)
Although the rudder is setup for a JR8911/8711 size servo.
Thanks, Patrick |
Originally Posted by sirrom
(Post 12233154)
I love the looks of this jet. To avoid confusion can someone please post a list of the recommended servos for this plane and for what flight surfaces.
Thanks, Patrick 8411's everywhere other than the rudder where a 8711/8911 fits. |
Originally Posted by jason
(Post 12233221)
8411's everywhere other than the rudder where a 8711/8911 fits.
|
What size are the main wheels? Are brake included with the landing gear and how good are they?
|
Yes it comes with breaks, see post 65!
TB |
So this is the second thread where the plane was assembled in like a week, and the only mod was to remove a little of the horizontal stab mounting? Is it really that good? I'm getting a little excited for this one. Please post some flight reports if you can.
|
Originally Posted by lfierro1
(Post 12233473)
So this is the second thread where the plane was assembled in like a week, and the only mod was to remove a little of the horizontal stab mounting? Is it really that good? I'm getting a little excited for this one. Please post some flight reports if you can.
Check out my flight videos: www.youtube.com/i3dm |
|
|
Chris how did the maiden go in Kentucky?
|
Originally Posted by Johnny9390
(Post 12233730)
Chris how did the maiden go in Kentucky?
The residual thrust on the k170 is almost enough to make it fly. So with this turbine its hard to slow down. The climbs are fun though . Still getting the knife edge trimmed out along with gryo. Will do more flights tomorrow |
Barry rang it out yesterday, great flight performance, slow flight was good( light wing loading), take off was short, a little to much power , Kingtech 170 was installed.
All in all , the T-1 jet made a great debute. Rcpete |
Originally Posted by rcpete347
(Post 12233880)
Barry rang it out yesterday, great flight performance, slow flight was good( light wing loading), take off was short, a little to much power , Kingtech 170 was installed.
All in all , the T-1 jet made a great debute. Rcpete this bird is LIGHT. |
Hey Dirk can I purchase this Jet with the landing gear set? and what's the cost without? I have about 3 sets of full retracts stuts and wheel and brakes that could work on this Jet :) If the gear set is part of the combo.then I will still put one on order.
Thanks |
All times are GMT -8. The time now is 04:27 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.