RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Kingtech presents the all new T1 sports jet (https://www.rcuniverse.com/forum/rc-jets-120/11630686-kingtech-presents-all-new-t1-sports-jet.html)

kevinthoele 07-08-2016 02:17 PM


Originally Posted by yeahbaby (Post 12232651)
I think I missed it earlier but does $1750 include wheels / brakes also?

Yes Buck it said gear tank and pipe $1760

Vettster 07-08-2016 02:37 PM

Can this Jet be shipped direct to Canada? It much less for us Canadians to have it shipped direct from China to Canada vers US to Canada that cost a Fortune!! No pun intended

lfierro1 07-08-2016 02:59 PM

this first batch of twelve is being shipped to our doors via DHL so if there are any left I'm sure you can get one too

Vettster 07-08-2016 03:08 PM

Cheers

TonyBuilder 07-08-2016 03:42 PM

Two or three left but I bet there gone by the weekend!

TB

yeahbaby 07-08-2016 04:24 PM


Originally Posted by kevinthoele (Post 12232661)
Yes Buck it said gear tank and pipe $1760

Thanks amigo

Wclays 07-08-2016 04:27 PM

Buck
Jump on board. At that price how can you go wrong.
I got one. Yeah baby:cool:

yeahbaby 07-08-2016 04:35 PM

Nice work amigo!! Look forward to seeing it in November at Mesa. Peggy's are big motors amigo, I need to confirm space available. And 100 oz is about 5 min for that fire breather, so need to see if space available for addutional saddle tanks or gear long enough for centerline drop tank. Great price no doubt.

TonyBuilder 07-08-2016 05:09 PM

Will spare parts be avelible here in the us, tires mostly?

Thanks

TB

flejter1 07-08-2016 05:49 PM

Vettster,

Yes, It can be shipped VIA DHL straight to Canada as I have already sold 2 to your fellow Canadians. The plane comes with Gear & Brakes, Thrust tube, Fuel cell and hardware. The DHL mailed kits WILL NOT come with the air tanks, as they are banned from shipping and will be taken out at customs. We are looking into having them shipped to us separately and we will try to disburse them to our customers. At this time though, they will not have air tanks included!!! We have sold our allocated 12 but was told to keep sending sold orders as other countries might not be selling their allocation and we can sneak theirs. If they can not keep up with our demand we are looking at a 6-8week build, paint & ship time frame. We will notify you that you were put on the build list and will give you opportunity to cancel the order or keep it. We will not cash your check until it is ready to ship.

Regards,

Dirk & Barry

flejter1 07-08-2016 05:54 PM

Tony,

We are looking into keeping spare parts on hand in the future. Keep in mind, the factory will be fulfilling the sold orders as a priority and will supply us with parts when sales relax a bit. I'm sure you know our Customer Service at KingTech has always been a high priority to Barry and Myself and we will keep our same standards with the T one models and Skymaster products.

Regards,
Dirk

TonyBuilder 07-08-2016 06:14 PM

Thought so, thanks Dirk.

TB

gunradd 07-08-2016 07:39 PM

1 Attachment(s)

Originally Posted by yeahbaby (Post 12232703)
Nice work amigo!! Look forward to seeing it in November at Mesa. Peggy's are big motors amigo, I need to confirm space available. And 100 oz is about 5 min for that fire breather, so need to see if space available for addutional saddle tanks or gear long enough for centerline drop tank. Great price no doubt.

Buck here is a pic for you. This one has a K170 installed. I did have to trim the mounts a bit to shoe horn it in.
http://www.rcuniverse.com/forum/atta...mentid=2171981

acabrera11 07-08-2016 07:45 PM

Hello, Where to buy one bird?

yeahbaby 07-08-2016 07:53 PM


Originally Posted by gunradd (Post 12232744)
Buck here is a pic for you. This one has a K170 installed. I did have to trim the mounts a bit to shoe horn it in.
http://www.rcuniverse.com/forum/atta...mentid=2171981

thanks amigo, that Peggy is a big ol girl and I think slightly larger than 170. can't wait to see Clays in a few months, I'm hoping he ordered the red one. Beautiful scheme

flejter1 07-08-2016 09:16 PM

acabrera11,

I replied 2 times to the PM you sent me. I guess it never went through. Please email me at, [email protected] and let us know the paint scheme you want to order. We have Thunderbirds, Ferrari, Yellow, Green, Blue, Orange and Red available at this time.

Cost is $1760 plus $300 DHL shipping to your door.

Please write your check for $2,060.00, payable to: Skymaster USA

Mail your check to:

Skymaster USA
289 S. Santa Anita Ave.
Pasadena, CA 91107

jonkoppisch 07-09-2016 04:36 AM

looking forward to picking one of these up. I read that there were some recommended updates. Will they be on the next batch?

gunradd 07-09-2016 09:00 AM


Originally Posted by jonkoppisch (Post 12232811)
looking forward to picking one of these up. I read that there were some recommended updates. Will they be on the next batch?

Not sure what they will change but I do know they went to double control horns on all flight surfaces now so that will be nice.

gunradd 07-09-2016 12:00 PM

2 Attachment(s)
OK the T1 is complete accept installing an xplus for the extra channels. Smoke system is all installed also.

Here is the cg and weight.. This weight is with a little fuel also because I just ran it. Has UAT full and about an inch in the main tank. She came out a little tail heavy even with everything up front but not much. I added a little weight to the nose. I see the flash messed up the pic.

Its 28.28 pounds
http://www.rcuniverse.com/forum/atta...mentid=2172049
http://www.rcuniverse.com/forum/atta...mentid=2172050

i3dm 07-09-2016 12:19 PM

which CG did you end up with, measured back from leading edge root?

Wclays 07-09-2016 12:24 PM


Originally Posted by yeahbaby (Post 12232751)
thanks amigo, that Peggy is a big ol girl and I think slightly larger than 170. can't wait to see Clays in a few months, I'm hoping he ordered the red one. Beautiful scheme

I got the Ferrari color scheme and I am putting a Kingteck K180 in since I have one needing a home. Use the extra thrust for up lines.

gunradd 07-09-2016 01:05 PM


Originally Posted by i3dm (Post 12232962)
which CG did you end up with, measured back from leading edge root?

I used your cg 210mm back from leading edge.

i3dm 07-09-2016 01:20 PM


Originally Posted by gunradd (Post 12232973)
I used your cg 210mm back from leading edge.

you would find that it flys fine on that setting but would still benefit from going back a bit, i didnt check exactly (still tweaking) but im guessing im flying at 220mm and beyond now...

Henke Torphammar 07-09-2016 01:36 PM


Originally Posted by roydefiant (Post 12230106)
what size turbine?

80-210 ;-)

kelly vallee 07-09-2016 02:04 PM

Does the Ferrari scheme come with all the decals? Has anyone tried this plane on a grass runway?


All times are GMT -8. The time now is 05:30 AM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.