HSD sequencer?
Hello, just wondering if anyone has had any experience with the pneumatic electric sequencers? It seems they come in some skymaster planes, but I’ve never seen one being used. I am asking because I am in the process of rebuilding a skymaster a10 and I’m looking into getting an “all in one” solution for the pneumatics. Just curious if these are any good. Louis |
I have ordered one now 18 days ago and have yet to receive it nor have I heard anything from HSD regarding shipping. At 28 days in, I will start a dispute with PayPal.
I'd say, not a fantastic start, but if it shows, that will be nice. |
Originally Posted by ravill
(Post 12474384)
I have ordered one now 18 days ago and have yet to receive it nor have I heard anything from HSD regarding shipping. At 28 days in, I will start a dispute with PayPal.
I'd say, not a fantastic start, but if it shows, that will be nice. |
|
is this basically the valve your talking about ( wasn't able to ad new picture of valve ) thanks terry
|
|
cool Rafill. I contacted them if you don' hear from them I'll keep checking back with you but I believe some one is going to contact you . I know some have been sent out from factory . thanks terry
|
I’m interested in either the one you posted or the “pro” version. They look like pretty neat devices. |
you can get them from banana hobby I believe they just got some in stock or soon . they work great.
|
Originally Posted by ravill
(Post 12474411)
ra
This is it. |
Originally Posted by arizcowboy
(Post 12474574)
Rafill it was shipped on the 26 I have a tracking number for you . you will get an email tommow on it .
|
I'm a tec for swiwin turbines and I work with both companies.So don' hesitate to ask questions will help when I can .. terry
|
Hey Terry, I have received no email, tracking number or the sequencer.
And to the OP, the pic that Terry posted is of the original dreamworks version of the hsd sequencer. I have 4 of them that I’ve used for years and I am replacing one that worked for me for 10 years. I love them. Just use a water trap, it’s an absolute must. If I ever receive the hsd one, I’ll be able to compare it. |
ok I'll give you the tracking number I received they were all at the ama show got three days
|
I just pulled it up showed attempted delivery please let me know . terry ps had tracking number on here decided not good idea . get a chance call me 602-818-8598 sent tracking .private message
|
I replied to your PM. Yes, the attempted delivery must be the sequencer. I'll post up some pics of it when I get it. Thank you Terry!
|
you bet thanks
|
I ordered and received one of the new HSD sequencer to replace the original airpower (dreamworks just re-sold the airpower unit) EVSD-5U I had in my SM hawk. It was almost a plug and play replacement and
It works almost exactly the same except for one major annoying difference..... The delay the valve applies is not just to the gear door channels. i.e. my gear door remain open after gear extension so "mode 1" on the valve. When I hit retract, the sequencer waits the set delay (2.5s in my case) before cycling the gear up. really annoying, I need to get my gear up quickly after takeoff before the airspeed builds up to high and causes the mains issues. Also when you hit the retract switch you feel like something isn't working waiting that long. not happy about it, but i guess it is what it is. it would be much better if you could control delays between any of the sequencing of the cycles |
https://cimg7.ibsrv.net/gimg/www.rcu...7c82bffc2.jpeg
Thanks for the heads up! My valve arrived yesterday. It replaces a 10+ year old unit, so it has big shoes to fill! I’m sure it’ll do great. |
nice keep me up to date I'm putting one in a T-3 next week
|
All times are GMT -8. The time now is 02:02 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.