RCU Forums - T-One Models T-50 Build.

Page 1 of 3

Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)

- - T-One Models T-50 Build. (https://www.rcuniverse.com/forum/rc-jets-120/11660375-t-one-models-t-50-build.html)

Digital Pilot

02-06-2019 11:34 AM

T-One Models T-50 Build.

T3chDad

02-06-2019 12:05 PM

Sharp!

Mikey5547

02-07-2019 06:04 AM

Looks great and looks like it breaks down easy for transport! What length is it?

ykim	02-07-2019 08:00 AM

Quote:

Originally Posted by Mikey5547 (Post 12500636)

Looks great and looks like it breaks down easy for transport! What length is it?

The length is 2.6m, wingspan is 1.84m

Mikey5547

02-07-2019 09:35 AM

Quote:

Originally Posted by ykim (Post 12500667)

The length is 2.6m, wingspan is 1.84m

Thanks very much. It’s perfect size!

flyloose

02-07-2019 01:53 PM

Beautiful ��

FenderBean

02-07-2019 02:03 PM

I like the cushions on the seats, would awesome to see this on the F-22

Digital Pilot

02-07-2019 04:05 PM

Quote:

Originally Posted by FenderBean (Post 12500760)

I like the cushions on the seats, would awesome to see this on the F-22

Even the harness is stitched.. super nice for sure. just waiting on the other two boxes and then we are underway..

Digital Pilot

02-15-2019 11:50 AM

The build will start this weekend along with the manual. We will be posting many photos and build updates as we move forward.
Here we go!!!!!

https://cimg7.ibsrv.net/gimg/www.rcu...13530f958f.png

https://cimg9.ibsrv.net/gimg/www.rcu...98bbf4a2c4.jpg

Ceeray

02-15-2019 12:06 PM

Its not a build. It´s a difficulty rate 1 assemby ! :) (like plastic 1/72 kits nowadays for ineeditdonenow-generation..)
Looks great!

Would vector tube work with this.. hmm

Digital Pilot

02-15-2019 07:44 PM

Quote:

Originally Posted by Ceeray (Post 12502828)

Its not a build. It´s a difficulty rate 1 assemby ! :) (like plastic 1/72 kits nowadays for ineeditdonenow-generation..)
Looks great!

Would vector tube work with this.. hmm

Well....Build/Assembly/Bolt together... Ether way the factory does a great job at doing all the hard stuff for you. I remember the days of fiberglass/Foam/Sanding and painting for months and i sure don't miss it lol
I do like the quality if the T-One ARF as it gets me in the air faster.

Not sure on the VT but I'm sure one could do it.

geneh-RCU

02-16-2019 01:00 PM

Looks great. I can't wait to see it at the field!

6blitz

02-19-2019 05:49 PM

Any updates? Really love the look of the T50! Gotta say T-One is putting out some awesome jets!

Digital Pilot

02-19-2019 07:53 PM

Quote:

Originally Posted by 6blitz (Post 12504014)

Any updates? Really love the look of the T50! Gotta say T-One is putting out some awesome jets!

The build is going smoothly.. No issues at all. This jet is designed to come apart very easily right behind the engine. We are developing a wire harness that will have the One-Click connectors on it. This will allow you to remove the back end of the fuselage in just a few minutes (3 Bolts) This will make transporting super easy for such a large jet.

The cockpit is designed very well. No cutting,hacking or braking it to get it to fit. Side panel screw in place and the floor boards, panels and seats are easily removed for access to components.

The aft section has all but one servo in it (Steering) This made installation very easy and simple to run wires.

https://cimg0.ibsrv.net/gimg/www.rcu...c10bcb82ad.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...9b44c79555.jpg
https://cimg1.ibsrv.net/gimg/www.rcu...97283aed81.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...fec810c5d5.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...817731c0fd.jpg
https://cimg4.ibsrv.net/gimg/www.rcu...a1cde48b2f.jpg

Mikey5547

02-20-2019 07:00 AM

Looks fantastic. Sorry it’s a little off subject but will T one be at jetpower this year?

6blitz

02-20-2019 07:50 AM

Wow looks great! Will you guys be at FL Jets? If so will you have the T50 there?

Thabks

chrisi f-18

02-20-2019 09:45 AM

T One

Hi Final Modellbau is at the Jet Power.This Company is the offiziell Dealer for the T One Modells.The new Hawk 100 and the T50 is 100% St the Meeting.Greets Chris

gunradd

02-20-2019 10:06 AM

Quote:

Originally Posted by 6blitz (Post 12504150)

Wow looks great! Will you guys be at FL Jets? If so will you have the T50 there?

Thabks

Yes Jeff will be their with the T50 and I will be showing the F22. We will have some T3s and T1s along with the T-1 F16 and the T-1 Euro fighter and the new T-1 yak. So we will have a almost everything from T-1 models at the event and flying. cant wait!!

6blitz

02-20-2019 10:25 AM

That’s great see you there!

Mark

Digital Pilot

02-20-2019 10:38 AM

We will have a tent full of T-1 aircraft... Come check it all out..

Going to be a great time!

Mikey5547

02-20-2019 11:20 AM

Quote:

Originally Posted by chrisi f-18 (Post 12504186)

Hi Final Modellbau is at the Jet Power.This Company is the offiziell Dealer for the T One Modells.The new Hawk 100 and the T50 is 100% St the Meeting.Greets Chris

Great look forward to seeing them! Will the Yak 130 be there too?

chrisi f-18

02-20-2019 11:27 AM

T One

Yes i Think so.The complete Model Range of T One Modells.Last Year at the tent was the T ONE MINI ,the Normal and the T3 and the Eurofighter.Greets Chris see you at the Jetpower 2019

Mikey5547

02-20-2019 01:20 PM

Quote:

Originally Posted by chrisi f-18 (Post 12504233)

Yes i Think so.The complete Model Range of T One Modells.Last Year at the tent was the T ONE MINI ,the Normal and the T3 and the Eurofighter.Greets Chris see you at the Jetpower 2019

Great looking forward to seeing the different jets and looking forward to meeting you and the Final Modellbau team!

chrisi f-18

02-21-2019 01:58 AM

Your welcome

Digital Pilot

03-01-2019 04:12 PM

All times are GMT -8. The time now is 01:49 AM.

Page 1 of 3

Show 40 post(s) from this thread on one page