Huracan Sports Jet Build.
 

I saw this earlier this year and was absolutely hooked! Ozzie from https://www.ozaero.ca/aerocarcontrol-modelismo got me all setup and my Huracan has arrived!
info on the aircraft copied from the website.With its sleek and modern design, the Huracan is an example of true craftsmanship. It comes fully painted with tailpipe, tank and smoke tank, as well as covers for the wings, elevator and rudder. All horns are installed, canopy adjusted, and the gear doors are installed. Ozaero also offers an additional custom painting service for customers in North America.

Weight: 20kg without fuel

Length: 3.009m

Wingspan: 2.671m

Nose to Tailpipe: 2.805m

Suggested Turbine: 210 to 250

Suggested Retracts: Huracan Electron Retract Set ER50's

Assembly Details:

• CG is in front of the wing tube
  
• 2.5mm down trim for straight and level flight
  
• Ail 12mm up 15mm down
  
• Elev 13mm up 15 down
  
• Flaps 38mm take-off 100mm landing
  
• Elevator down trim with flaps 6.5mm at full flaps
  
• Rudder 27mm
  
• Crow 15 to 20% — it's in the radio
  
  
  You Tube

https://cimg5.ibsrv.net/gimg/www.rcu...2b089b29c0.jpg
Great packing job from the factory!
https://cimg6.ibsrv.net/gimg/www.rcu...46caf9cd61.jpg
Rudder
https://cimg8.ibsrv.net/gimg/www.rcu...858cead1e8.jpg
Wing. Internal flap linkage and external Aileron.
https://cimg9.ibsrv.net/gimg/www.rcu...8ca0436ad5.jpg
https://cimg1.ibsrv.net/gimg/www.rcu...d4483cf1cb.jpg
https://cimg2.ibsrv.net/gimg/www.rcu...67cdb4d7ba.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...17a6dc49c0.jpg
https://cimg5.ibsrv.net/gimg/www.rcu...cf23ca7438.jpg
She is a large aircraft!
https://cimg6.ibsrv.net/gimg/www.rcu...52b26cfb7f.jpg

https://cimg3.ibsrv.net/gimg/www.rcu...90062b1f07.jpg
https://cimg4.ibsrv.net/gimg/www.rcu...7a7b234bfc.jpg
https://cimg6.ibsrv.net/gimg/www.rcu...1386cffd2e.jpg
https://cimg7.ibsrv.net/gimg/www.rcu...5ba888b847.jpg
https://cimg8.ibsrv.net/gimg/www.rcu...4d11b70928.jpg
https://cimg9.ibsrv.net/gimg/www.rcu...0cf231a7b4.jpg
https://cimg0.ibsrv.net/gimg/www.rcu...87e92f6aba.jpg
https://cimg1.ibsrv.net/gimg/www.rcu...2e499f98f4.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...bb7566a3ba.jpg

I saw one at Thunderthrust 2 in july....they are nice, that one was custom painted....wings servo's were mounted in the hatch covers...

Now the aileron is mounted in the wing rib ...love the Pennzoil chipmunk paint scheme.

‘That look a little far from the cover…I always hard mount all the servo’s…..but we will see!

Ahh this was the plane you are going to put the Swiwin 400 in🤣.... just joking😉 really nice plane Jonathan. Can't wait for the build vids on youtube.

Geoffrey

Huracan
 

I'm also building one with a custom paint scheme.

https://www.rccanada.ca/rccforum/sho...d.php?t=612025

- Yea I heard about the Aileron's getting mounted to the servo cover. I think the Rib mounting will work out well. We will see when the time comes.

- As of right now planning on installing a SWIWIN 240 but the 300 has crossed my mind! HAHA.

This jet will look so good with like f-35 paint job with those lightings on the rudder, spot scale looking jet, this will work for someone who doesn’t like the sport jets and wants the aggressive design.

its really beatiful plane .. i need to get one immediately and especially this color...

this plane use about 10cm dia wheels under the wings ?
and how many kg servos plan to use on elevators and ailerons ?
thanks

I have electron landing gears from my previous mephisto ，do you think they should
be same ?they have 10cm wheels and leg with wheel on it about 25cm (only leg not include retract part)
thanks

I have not measured the wheels but I belive they are 4"/100mm wheels.
I will be using JR 8911 Coreless servos all around. 855 oz/61.6kg
https://www.deeforce.net/product-page/jr-dfa-s8911

I can measure the landing gear tonight and will post some pictures for you.

Hi guys not hijack the thread but I will a US dealer for this model and future models they design. I will be getting one for demo at events for people this winter!
Looking forward to seeing Jonathans build

Congratulations Keith! :cool:

seems landing gear same as what I have..servos are really good choice ..
Thanks

Thanks bud, your smiley face had me for a sec I couldnt tell if that was grin or a smirk lol
My shop will be done soon so hopefully I can get back to build videos.

HAHA. Supposed to just be a "Cool" Emoji.
:o

Some Photos of the gear and wheel sizes.
https://cimg6.ibsrv.net/gimg/www.rcu...d8985e8b46.jpg
Mains are 100mm/4"
https://cimg7.ibsrv.net/gimg/www.rcu...5c0292ff65.jpg
https://cimg8.ibsrv.net/gimg/www.rcu...edce7d8a7b.jpg
https://cimg9.ibsrv.net/gimg/www.rcu...847b546c71.jpg
https://cimg1.ibsrv.net/gimg/www.rcu...f352e4fc20.jpg
https://cimg2.ibsrv.net/gimg/www.rcu...9f06b69287.jpg
https://cimg3.ibsrv.net/gimg/www.rcu...053330e6fd.jpg

Really thanks for details , this landing gear same as what i have on my hand , which left from my second mephisto :)

but its very strange that, i contacted with Ozaero also Carlos and He adviced me to contact with Miguel Silva Portugal , but none reply my order plane request :)

i m still waiting for their reply..

really pretty plane and very interest in your building photos.

Thanks

Glad to hear that your gear is the same!
i'm assuming because your location they wanted you to go directly to Miguel.

Video #1 is up!

https://cimg6.ibsrv.net/gimg/www.rcu...2b1c390a08.jpg
Let the Build of the Huracan from Aerocarcontrol Begin!
https://cimg9.ibsrv.net/gimg/www.rcu...5c91c8c9c2.jpg
Step #1, Seal all the wood joints with thinned epoxy. I mix up some epoxy and thin it to a water consistency. Paint on with an epoxy/acid brush.
https://cimg4.ibsrv.net/gimg/www.rcu...224d255db7.jpg
Getting ideas for equip layout.

https://cimg5.ibsrv.net/gimg/www.rcu...7352f0907f.jpg
The fit of everything on the kit is wonderful! So much of it is pre done.
https://cimg6.ibsrv.net/gimg/www.rcu...942fc52953.jpg
Front of pipe area. I was wondering what the bellmouth was made of. A magnet sticks to it so it's some form of steel. Stove Pipe maybe?
https://cimg7.ibsrv.net/gimg/www.rcu...69caddb7fb.jpg
All of the connection work is done already! This is the elevator tube.
https://cimg0.ibsrv.net/gimg/www.rcu...d47b487a02.jpg
Rudder connection point. Access for fastening is through the end/tailpipe section.
https://cimg1.ibsrv.net/gimg/www.rcu...68755be385.jpg
Another shot of the pipe in fuse. The fuse is a great design. Easy to make it splitable to fit into a small vehicle or for shipping. The pipe stays with the rear end. The engine stays with the front. There would be 3 servo connection points separating the back from the front.
https://cimg3.ibsrv.net/gimg/www.rcu...d26bfe5ca3.jpg
The hardware included for the surfaces.