Rossi 90 DF
 

Wanting to cap off my high speed needle on Rossi 90 DF for in flight mixture. If anyone has an old carb for parts, send a PM please.

Thanks
Cassat

RE: Rossi 90 DF
 

You can use your present needle setup by leaving it turned out a couple of turns(very rich mixture) and then use the mixture control in line as well to control inflight mixture.

RE: Rossi 90 DF
 

Zaney Ok. I will try that. Thanks for the reply.

Cassat

RE: Rossi 90 DF
 

Hi Cassat.

During the years, I`ve had numerous engines in my DF jets.
The best was the Rossi 90, no doubt.. A Italian factory tuned beast.

Once it entered the 20k, it howleded up like it was it`s last flight...

I`d like to help those who aim for the turbine jets, because they seldom look back.. Soooo...

I`ll give you my brand new Rossi 90, with a Gleichhauf fan.
Of course, free of charge, as long as you pay the postage.

I don`t use them anymoore, it`s better someone else does, than collecting spiderweb in a corner of my too small hobbyroom.. The engine have never consumed as much as a sniff of fuel, but it`s well preserved with layup-oil.

You see, when I saw turbine for the first time, i had two Rossi`s in my F-15, not started yet.. ( Thanks to Per Strømmen)
Once at home, the first ting I did, was to remoove them as fast as I could, and aim for a replacement..

This is the third and last i have (had), and they all have been given the same as you`ll get yours.
Enjoy it, and welcome to the turbine world later on!
Use your engine as spare parts. ;)

All the best

Gudmund

RE: Rossi 90 DF
 

Hello Gudmund!

If there is anything else that takes up space in your small hobby-room, just send it over here... :D:D:D

RE: Rossi 90 DF
 

You know Gudmuund, that AW Hawk is going to take up a lot of room. Just let me know which jets you need to get rid of and I'll send you my address and the shipping charges.:D

RE: Rossi 90 DF
 

Yes you might, Gary..
But Cassat won`t.. :)

Perhaps he`s into turbines allready?? :D

Brg
Gudmund

RE: Rossi 90 DF
 

Gudmund I will check today if I can wire you some money for postage and handling.

Cassat

RE: Rossi 90 DF
 

Gudmund example should be followed... we all have lot´s of old planes and parts rusting on our hangars that are the other man´s treasure.

That also helps to keep the mess room much cleaner and organized, LOL.


Best regards, Enrique

RE: Rossi 90 DF
 

Cassat, the moore important than the money at the time, is your adress..
You can transfer the cost when you see the stamps.....

I though this might wake you up. ;)

Gudmund

RE: Rossi 90 DF
 

Yes Gudmund,

It is very nice indeed. I have PM'd you the address. It is for the project of the Grumman F9F Panther. I decided to use the Rossi instead of OS.
Our first one did fly with the 66 turbine and kerosene quite well.

Cassat

RE: Rossi 90 DF
 

Gudmund,

I have PM'd you my addresS as requested but did not hear back from you? are you frozen there?

Cassat

RE: Rossi 90 DF
 

Been at work quite a while, and have other things in mind.
But it`ll get there.
But you`re right, frozen is a correct word, as I "inspected" the seasonal site yesterday.
You can`t get a flatter runway than this!!

This is definition of COLD..
Minus 12 deg C.

Brg
Gudmund

RE: Rossi 90 DF
 

Dave.

Sendt it today, so it`s on it`s way...


Santa C

RE: Rossi 90 DF
 

So Dave.

How do you find my 1000 USD unit? [>:]
Fits nice, ore what?

You received it three weeks ago, as you said.

Glad if things works out the way you wanted... Or?

Gudmund