aeropoxy
 

does anyone know were I can buy nozzles for my BVM dispenser for less money?

aeropoxy
 

Aeropoxy is BVMs name for hysol 9462 which made by dexter, dexter have now been bought out by loctite and they now distribute the glue. So try a loctite agent in your area.

jason

Epoxy Nozzels!
 

JetGuy,
Try a store that sells automotive paint, PPG etc. They carry Bondo and epoxy for auto body repair. The local dealer in my area sells several lenght nozzels for the dispensers. At a much lesser price!

Regards,
Ken..........

Nozzles
 

McMaster-Carr (www.mcmaster.com) has 6" nozzles, bag of 12 for $9 or a $1 each individually. Search for Loctite or epoxy.

aeropoxy
 

Hey Guys, I just sqeaze some out on a plastic cover and mix with a popcicle stick. the glue even sets up better! I have some of the tips but i prefer not to use them.

Jim

aeropoxy
 

http://www.glueguru.com also selss nozzles for the Hysol cartridges. I had to buy a $150 minimum order, which is fine for the amount of ubilding I do, but probably too much for most folks.

The savings weren't all that huge BTW.

Gordon

thanks for all the help
 

It lead me to a local distributor

Thanks again

Poxy Tips
 

I just pull the spiral out of mine when I am done with a long-nose pliers, drop everything into a sealed jar with acetone, and pull them out when I am ready for the next use.

Tom

aeropoxy
 

deleted

aeropoxy
 

plastech-weld Sarasota Fl 34236 1-800-963-3194 734-717-6991 I was using this stuff before BVM started selling it. Glue is about 6 or 7 at tube nozzles come in a pack of 25 for about 25 to 50 cents each and the guns are not that expensive either.

Aeropoxy mixer tubes
 

Check out the people who make the mixers. (Notice the free samples) Enjoy
Kerry MixpacUSA

aeropoxy
 

I buy mine from a local Industrial Parts house, Applied Technologies, they have locations all over the country. I buy mine a case at a time (12 tubes) and pay around $6 a tube for it.

aeropoxy
 

I get new mix tubes from my dentist. They use the same guns with a different glue for crown work.

Mark M.