quick fuel tank question
 

Hey guys, I know this has been posted several times but I just cant find the answer I am looking for.

What are you using to seal the cap and the lines on the lid. IE: I have a juice tank that I drilled two holes through the cap, installed a nut on each side for the fuel and vent. Can I just use like a rtv silicone type of sealer? What is preffered and what are you guys using?

Thanks in advance,
Larry

RE: quick fuel tank question
 

Hi Larry, I have used Hysol with great success.

Angus

RE: quick fuel tank question
 

Sealall !!!

RE: quick fuel tank question
 

Least expensive method if you do not have a Hysol Applicator Gun is the 2 part PC-7 from local hardware store. SILICONE is a not compatable or recommended with Kero or GAS.

RE: quick fuel tank question
 

Seal All works for me too.

RE: quick fuel tank question
 

Hi Larry

How's it going , what are you flying ?
I agree with Angus I also use Hysol it has worked great so far

Good Luck

Ted

RE: quick fuel tank question
 

I have been using Seal All, but it becomes brittle after a while...