BVM Bobcat decal locations
 

I have almost completed a Bobcat for a client and are left with the decals to finally apply.

I am happy with the BVM supplied vinyl decals, and these are in place, however I have also a set of PROMARK graphics in the form of 'sport jet kit' and wondered if you guys could post some pics of where you have placed some of these graphics on your own jet/bobcat.

The graphics include - BEWARE OF BLAST - NO STEP - RESCUE OPPOSITE SIDE - FILLER WELL JP-4 - NO PUSH - RESCUE etc ........

I am looking for inspiration here as I know there are no hard and fast rules here ;)

Cheers

marc

RE: BVM Bobcat decal locations
 

Is it for the Scale bobcat or the Sport Bobcat ? :)

RE: BVM Bobcat decal locations
 

Composite Sport in Navy colours.

RE: BVM Bobcat decal locations
 

I'd think that placing them in a scale-ish location would be fine... just look at some pics or decal guides (from plastic model decal sets) of real jets to get an idea of where they should be located. Some examples -

BEWARE OF BLAST - On the rear of the booms, or on fuse ahead of the turbine

NO STEP - On wing root or LE near fuse

RESCUE OPPOSITE SIDE - on one side of fuse, below canopy, about 1/2 way up, usually on the right side

FILLER WELL JP-4 - Upper edge or side of fuse behind cockpit, or out 1/3 span at high point of wing (fuel filler placard)

NO PUSH - On the top rear edge of flaps or ailerons, or rudders

RESCUE - On fuse opposite side of the "rescue opposite side"

Have fun!

Barry