RCU Forums - UP6 Set Up Issue

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)

- - UP6 Set Up Issue (https://www.rcuniverse.com/forum/rc-jets-120/7635800-up6-set-up-issue.html)

jclittle

06-18-2008 09:56 PM

UP6 Set Up Issue

I'm installing a UP6 brake valve in my 4th jet, so I've done this before. Both air lines are hooked up properly, one in the other out, both on the correct sides - however once the pressure gets to 40psi the small pin hole in side of the valve near the "air out" side startes to let air out. Anyone know why?

Ruizmilton

06-18-2008 10:00 PM

RE: UP6 Set Up Issue

Maybe that's exactly the problem, on mine, the pinhole is on the "air in" side, swap your lines and try again...

jclittle

06-19-2008 06:33 AM

RE: UP6 Set Up Issue

Ruizmilton - thanks, I guess the valve was upside down...its all set.

All times are GMT -8. The time now is 01:08 AM.