B1B - Lancer
 

I'll ask around, my father was director of flight test for the B-1. He might have some drawings or some of his buddies might. I just did a quick internet search and came up empty. Maybe the 3 view drawings are still considered confidential.

I saw a ducted fan model on the internet once, it was about 8 ft long. I'm not sure if the wings swept or not but it looked good. I think it was on the RC jet web page.

I'll get back to you if I can come up with something.

Good Luck,
Mitch

B1B - Lancer
 

I asked him and he said he had some isometric drawings but he didn't think he had any 3 view drawings. There must be something on the internet. I'll continue to look.

http://www.usrcjc.org/projects/project_ldesmet.htm

Above is the link to a model B1 that I admired. Maybe he might help...

Regards,
Mitch

B1B - Lancer
 

Here's a three view drawing!

http://www.usrcjc.org/projects/ldesmet/b-1b_20.gif

Mitch

B1B - Lancer
 

Hey Ron, I am not sure where you hail from But if your near TX try and look up Butch Sickles or lynn Mc Caully. these two guys are the top of the class on this type of Jet. They were comission by the USAF to Build a B-1B about 5/6 years ago. Last I heard it was flying. They also have a very nice B-58 too!
steve

B1B - Lancer
 

Go to http://www.flightsimnetwork.com/aircraft3-view/44.html for a three view drawing... I was looking for one, found this on Google... then kept looking and found the drawings... How many jets are you planning on using?