Which servos?
 

Will be starting construction of my Facet 1200 soon and I was just wondering what servos you guys would recommend. This is my first turbine powered model and I want to get it right. I generally use JR gear, and, servo-wise, have nothing more exotic than the humble 517.

I'm looking for the best combination of power/speed/precision and cost. Also, would you go with 6v or 4.8v, have only ever used 4.8v so far.

Stuart

Servo's
 

Talk to George (VA Beach) as he has a faucet and is distributor in our club.

Re: Servo's
 

Is that the new floatplane version of the Facet, that I've been hearing rumours about ? ;)

Gordon

Which servos?
 

Stuart,

Vampire, the designer of the Facet will tell you which ones. Give him a PM, very nice guy and very helpful.

I'm also building a Facet 1200 with a Wren 54. Your plans call out 70 oz servos on a couple of control surfaces. I'm thinking of using the servos I have on hand, some Fut-9202s and a couple of Hitec 5625s. I'm also going to ask Vampire what he thinks.

Later,

Jerry

Re: Re: Servo's
 

Oh Gordo', don't believe all the rumors, just some ;) . With a good breeze and little too much flap and not quite enough power on final coming straight at me, I couldn't see it got too slow until too late, that's all.
The Facet is back together and will be flying today.

A "FACET FLOAT"? There's an idea :idea: :D

Stuart, as far as servos, the choice really is up to you. I have all digitals in mine just because that is what I had. The first one that got stolen didn't have anything fancy except a high torque digital on the elevator. But I can tell you, I could "feel" the difference in the way the two flew, being the second one with better servos made a HUGE difference. The diference not being in it's ability to fly or inadequate controls, just crispness and response. Hope this helps.

George

Re: Re: Re: Servo's
 

Oops - sorry George - didn't know you had had any problems with it - I was just having fun with the mispelling of Facet as Faucet ...

Gordon