|
BVM Brass Coupler replacement?
part no. BVM #1318
those are used for disconnecting the Gear Door Cylinder from the 1/16" pushrod (when removing the wing) on Aggressor III / Ultra Viper is there something similar? if someone still has a pair they don't need please PM me. I will be glad to buy them from you. |
RE: BVM Brass Coupler replacement?
1 Attachment(s)
here's a pic of the setup
|
RE: BVM Brass Coupler replacement?
Did you contact BVM?
We probably have them in stock. They are also used on the Classic Bandit, and the Classic Balsa Bandit. I'll check Monday. |
RE: BVM Brass Coupler replacement?
ORIGINAL: Harley Condra I'll check Monday. I did a search for the part no. and nothing came up so I figured they don't keep old parts. |
RE: BVM Brass Coupler replacement?
George,
Did you receive my reply to your PM? Contact me right away. Good news! |
RE: BVM Brass Coupler replacement?
Yes Harley, thanks a million!
BVM has the best service; Harley found a couple of the couplers for me and will ship them to me at no cost! Thanks again Harley. You will have to come to Prague and collect a couple of cold ones from me. Cheers, Vasek |
RE: BVM Brass Coupler replacement?
George,
BVM will ship the parts tomorrow (2-26-2010). Keep you eyes open for them... Sorry, but I forgot to include the setscrews for them, but that should not be a problem. We have always used socket head cap screws, thread size 4-40 National Coarse. Best regards, |
RE: BVM Brass Coupler replacement?
ORIGINAL: Harley Condra George, BVM will ship the parts tomorrow (2-26-2010). Keep you eyes open for them... Sorry, but I forgot to include the setscrews for them, but that should not be a problem. We have always used socket head cap screws, thread size 4-40 National Coarse. Best regards, He's in Prague and may not be able to get 4-40 National Coarse? Mike |
RE: BVM Brass Coupler replacement?
ORIGINAL: BaldEagel ORIGINAL: Harley Condra George, BVM will ship the parts tomorrow (2-26-2010). Keep you eyes open for them... Sorry, but I forgot to include the setscrews for them, but that should not be a problem. We have always used socket head cap screws, thread size 4-40 National Coarse. Best regards, He's in Prague and may not be able to get 4-40 National Coarse? Mike If George can't find the correct screws, he can drill them out with a 2.5 MM drill then tap them 3.0 MM. I'm sure he can figure it out. |
RE: BVM Brass Coupler replacement?
You're a good man Harley!
No prob for the screws, I can get 4-40 screws from TowerH the next time I place an order with them. These little screws from EZ connector look just the right lenth to me: http://www3.towerhobbies.com/cgi-bin...?&I=LXD930&P=7 Cheers, Vasek |
RE: BVM Brass Coupler replacement?
George,
Those are correct...4-40 x 1/4" long. Tower Hobbies also sells the screws in bags of 4 pcs (Du-Bro). Tower part number is LXE082..price $1.05 for a bag of four pieces. |
RE: BVM Brass Coupler replacement?
ORIGINAL: Harley Condra Tower part number is LXE082..price $1.05 for a bag of four pieces. |
| All times are GMT -8. The time now is 02:00 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.