RE: My scale 1/5 F-16 B
Peter, Yes I will show some pictures soon. Been busy doing some other things. Getting ready for JWM.
I have tons of pictures from some publications that I can only rely on. |
RE: My scale 1/5 F-16 B
Eddie, one more for you :D.
One more panel to go, the 'donut' and the topside is finished. Then I will start with the glassing the cockpit windscreen. http://www.modelbouwforum.nl/forums/...e75231-004.jpg http://www.modelbouwforum.nl/forums/...e75232-005.jpg http://www.modelbouwforum.nl/forums/...e75233-006.jpg |
RE: My scale 1/5 F-16 B
Finally the last pieces, exept for the tailcone/nozzle. It is difficult to make a good picture, he is soooo big. :D
http://www.modelbouwforum.nl/forums/...e75368-001.jpg http://www.modelbouwforum.nl/forums/...e75372-002.jpg http://www.modelbouwforum.nl/forums/...e75369-004.jpg http://www.modelbouwforum.nl/forums/...e75370-005.jpg http://www.modelbouwforum.nl/forums/...e75371-007.jpg |
RE: My scale 1/5 F-16 B
While I am on the back of the plug why not make the turkey's. They are a exact copy of the real one and with closed nozzle it is precies the diameter of the big one in scale. I will later open them up a little bit more for scale look. This one will not be operationally, thats for later.
Here they are, they look scratchy but fine sanding is for later. 15 turkeys. http://www.modelbouwforum.nl/forums/...e75597-001.jpg http://www.modelbouwforum.nl/forums/...e75598-002.jpg To compare. http://www.modelbouwforum.nl/forums/...e75599-004.jpg http://www.modelbouwforum.nl/forums/...e75596-006.jpg http://www.modelbouwforum.nl/forums/...e75595-005.jpg Hope you like it. |
RE: My scale 1/5 F-16 B
Turkey feathers look fantastic peter, those are the one things i am not looking forward to doing on my f14. Atleast i only have to do them once though since they are identical.
|
RE: My scale 1/5 F-16 B
Sweetness!
|
RE: My scale 1/5 F-16 B
Thanks Paul :D
Nozzle update, I hope that I can compete with this in the future with other models :D. The finger seals are now in place. Next step is to make the nozzle segments and seals. http://www.modelbouwforum.nl/forums/...nozzle-003.jpg http://www.modelbouwforum.nl/forums/...nozzle-004.jpg |
RE: My scale 1/5 F-16 B
Dude!!! that is gonna be one bad mammmaa jammma!!!
very nice |
RE: My scale 1/5 F-16 B
Peter::)
Perfect job, congratulations.;) RB from Spain. Carlos. _________________________ http://cmjets.blogspot.com/ |
RE: My scale 1/5 F-16 B
Thanks guys. :D :)
|
RE: My scale 1/5 F-16 B
Peter,
you wanna do my exhaust nozzle to? :) Yours is looking fantastic. |
RE: My scale 1/5 F-16 B
:D I think your's will be as beautiful as mine, it's just a matter of cutting the right lines and a little bit of sanding.
Grts, Peter |
RE: My scale 1/5 F-16 B
Exept for the nozzle segments and seals 'almost' ready. :)
http://www.modelbouwforum.nl/forums/...nozzle-004.jpg http://www.modelbouwforum.nl/forums/...nozzle-003.jpg |
RE: My scale 1/5 F-16 B
While the canopy windscreen mold is drying I did some nozzle drawing. The parts fit together finally! Not all of them are there yet but tis is the first setup.
(Thomas, too bad it is not the same as in the F14) http://www.modelbouwforum.nl/forums/...ly-nozzle2.jpg http://www.modelbouwforum.nl/forums/...bly-nozzle.jpg http://www.modelbouwforum.nl/forums/...ly-nozzle3.jpg The real thing. http://www.modelbouwforum.nl/forums/...520exhaust.jpg |
RE: My scale 1/5 F-16 B
Peter
I have been following your great efforts with amazement at the patience you have! Your working tailfeathers reminds me of a visit to the Ohain Whittle in Germany back in 2004 when I saw working tailfeathers on a turbine and also working afterburner. I dont recall the tailfeathers actually flying but the afterburner worked well but did use a heap of fuel. http://www.youtube.com/watch?v=lZ04gecuNlQ The afterburner you can hear being switched on when the plane starts to go vertical and switched off when it has reached altitude. You need to turn the sound up to hear it clearly. Itw as also used for takeoff. http://www.youtube.com/watch?v=1Ruylp7_RLE John |
RE: My scale 1/5 F-16 B
Peter,
The nozzle looks great. Does the F-16 your modeling have the GE F110 or the Pratt & Whitney F100? If it has the General Electric F110, then it is in fact the same as my F-14D tailpipe. The only difference being, the F-14 version has a 50" extension between the afterburner and exhaust nozzle |
RE: My scale 1/5 F-16 B
Thomas, we fly with the P&W F100. There is no budged for a better engine :D. Later I will make another nozzle for the C verson ;)
|
RE: My scale 1/5 F-16 B
ORIGINAL: Peter Coers Thomas, we fly with the P&W F100. There is no budged for a better engine :D. Later I will make another nozzle for the C verson ;) |
RE: My scale 1/5 F-16 B
De mold for the windscreen is ready, I will make the positive later.
http://www.modelbouwforum.nl/forums/...canopy-002.jpg The panelling on the left of the CP is now in place. http://www.modelbouwforum.nl/forums/...e76939-013.jpg This is the first part for the scale nozzle, it will be moulded with rubber to make more. (this is for the static) http://www.modelbouwforum.nl/forums/...t-seal-001.jpg |
RE: My scale 1/5 F-16 B
hey Peter, you are welcome here in germany to pick up 10K
as a deposit for the first two kits .... :D:D:D |
RE: My scale 1/5 F-16 B
Hi Steven thats 291,4 km away from home, not so far :D .......€? :D
I will keep this in mind :D:D:D. Too bad I am not at JetPower in september, the plug is on the Open Dagen at Leeuwarden Airbase on 16 and 17 of september. Grt, |
RE: My scale 1/5 F-16 B
1 Attachment(s)
ORIGINAL: invertmast Peter, The nozzle looks great. Does the F-16 your modeling have the GE F110 or the Pratt & Whitney F100? If it has the General Electric F110, then it is in fact the same as my F-14D tailpipe. The only difference being, the F-14 version has a 50'' extension between the afterburner and exhaust nozzle |
RE: My scale 1/5 F-16 B
The detailing around the CP is now ready, again a little bit further to the end. :)
http://www.modelbouwforum.nl/forums/...e77602-006.jpg http://www.modelbouwforum.nl/forums/...e77603-007.jpg http://www.modelbouwforum.nl/forums/...e77604-011.jpg http://www.modelbouwforum.nl/forums/...e77605-012.jpg Also made a rubber mold for the nozzle part. http://www.modelbouwforum.nl/forums/...e77601-002.jpg |
RE: My scale 1/5 F-16 B
Looking good peter.. you are progressing very quickly! I thought that fuselage was nearly done in the first pic, then int he 2nd i noticed the bottom was still be be detailed. It is looking fantastic!
|
RE: My scale 1/5 F-16 B
Are you plannng on entering this for the JWM 2013? Or will weight be an issue?
|
All times are GMT -8. The time now is 10:11 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.