More goodies!
10-05-2004, 02:16 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Who z\' whats it,
YT, BOTSWANA
Posts: 7,133
Likes: 0
Received 0 Likes
on
0 Posts
More goodies!
Bling! Bling! The shop had the new LST polished pipe and header. After they twisted my arm i ended up buying it.
10-05-2004, 03:59 PM
#6
Member
Join Date: Sep 2004
Location: West Jordan,
UT
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
RE: More goodies!
The polished pipe/header combo looks sweet!
ThermalRD-
I've been reading your posts about running last Sunday at Dirt Burners. Sounds like you're pretty satisfied with your LST set-up, even more so with your Revo. I'm running a LST and curious if you had the black springs in front and the white in the rear of your LST last Sunday? Have you replaced the grease in your diffs with silicone? What CA? I just put 30K in both diffs on mine but won't be running it till this Thursday. I didn't notice sways bars on your LST, I've got front and rear ones on mine and it made a solid improvement in cornering on mine at the track. I'm running 40 series bow ties with good results, but haven't tried anything else besides the stockers. What wheel/tire combo are you running?
Good luck this Sunday at Dirt Burners! Sure you don't want to run the LST in the race?
ThermalRD-
I've been reading your posts about running last Sunday at Dirt Burners. Sounds like you're pretty satisfied with your LST set-up, even more so with your Revo. I'm running a LST and curious if you had the black springs in front and the white in the rear of your LST last Sunday? Have you replaced the grease in your diffs with silicone? What CA? I just put 30K in both diffs on mine but won't be running it till this Thursday. I didn't notice sways bars on your LST, I've got front and rear ones on mine and it made a solid improvement in cornering on mine at the track. I'm running 40 series bow ties with good results, but haven't tried anything else besides the stockers. What wheel/tire combo are you running?
Good luck this Sunday at Dirt Burners! Sure you don't want to run the LST in the race?
10-05-2004, 07:36 PM
#8
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Who z\' whats it,
YT, BOTSWANA
Posts: 7,133
Likes: 0
Received 0 Likes
on
0 Posts
RE: More goodies!
LOL. Ya, alot of people mentioned that to me today. Larrys is getting more goodies for me this week too. 
ORIGINAL: binaryterror
Thats a lot of goodies for a truck with as much pain as it's caused you...
Thats a lot of goodies for a truck with as much pain as it's caused you...
10-05-2004, 07:42 PM
#9
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Who z\' whats it,
YT, BOTSWANA
Posts: 7,133
Likes: 0
Received 0 Likes
on
0 Posts
RE: More goodies!
Yes, my LST was running the black and white springs this past sunday, and 30wt oil front and rear in the shocks. My diffs are tuned right now with 10k front, 10k rear. I simply havent gotten my hands on the sway bar kit yet. I'll buy em as soon as my LHS gets them. Im running the dark grey XTM giant series wheels, with the giant race tires. I will probably try some 40 series on this truck soon too. I really like them on my Revo. I would run the LST in the race, but it has yet to prove itself reliable to me. Im capable of running clean laps thru the whole tank. No screw ups, no wrecks... I dont want a broken axle, or CVD costing me that race. Aside from that, im twice as fast on the track with my Revo. In the future i will be running the LST though. Just not sure when. It will have to prove durable thru many many runs on practice night at that track.
ORIGINAL: LSTdude
The polished pipe/header combo looks sweet!
ThermalRD-
I've been reading your posts about running last Sunday at Dirt Burners. Sounds like you're pretty satisfied with your LST set-up, even more so with your Revo. I'm running a LST and curious if you had the black springs in front and the white in the rear of your LST last Sunday? Have you replaced the grease in your diffs with silicone? What CA? I just put 30K in both diffs on mine but won't be running it till this Thursday. I didn't notice sways bars on your LST, I've got front and rear ones on mine and it made a solid improvement in cornering on mine at the track. I'm running 40 series bow ties with good results, but haven't tried anything else besides the stockers. What wheel/tire combo are you running?
Good luck this Sunday at Dirt Burners! Sure you don't want to run the LST in the race?
The polished pipe/header combo looks sweet!
ThermalRD-
I've been reading your posts about running last Sunday at Dirt Burners. Sounds like you're pretty satisfied with your LST set-up, even more so with your Revo. I'm running a LST and curious if you had the black springs in front and the white in the rear of your LST last Sunday? Have you replaced the grease in your diffs with silicone? What CA? I just put 30K in both diffs on mine but won't be running it till this Thursday. I didn't notice sways bars on your LST, I've got front and rear ones on mine and it made a solid improvement in cornering on mine at the track. I'm running 40 series bow ties with good results, but haven't tried anything else besides the stockers. What wheel/tire combo are you running?
Good luck this Sunday at Dirt Burners! Sure you don't want to run the LST in the race?
10-05-2004, 07:44 PM
#10
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Who z\' whats it,
YT, BOTSWANA
Posts: 7,133
Likes: 0
Received 0 Likes
on
0 Posts
RE: More goodies!
Well, i cant help it. Like i said, i didnt mean to buy it really... It was at the LHS, i saw it, and then i had to have it. Your parents need to get you some more hop ups!
ORIGINAL: Spudnik
man thermal get s a new thing each week, almost two a week. i get a proformence thing each month or two[&o]
man thermal get s a new thing each week, almost two a week. i get a proformence thing each month or two[&o]
10-05-2004, 07:45 PM
#11
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Who z\' whats it,
YT, BOTSWANA
Posts: 7,133
Likes: 0
Received 0 Likes
on
0 Posts
RE: More goodies!
It all came together, and i believe it was 56 dollars at Riders. It would have been less at a better LHS. But i was at Riders, so i bought it there.
ORIGINAL: lstman
how much is that setup?pipe and header?
how much is that setup?pipe and header?
10-05-2004, 10:58 PM
#16
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Who z\' whats it,
YT, BOTSWANA
Posts: 7,133
Likes: 0
Received 0 Likes
on
0 Posts
RE: More goodies!
Never! As soon as i pick out a new engine for the LST i'll throw that Mach .26 in the garbage.
ORIGINAL: cendude
Thermal,
Whjen are you going to put the MACH .26 in your Revo?
Thermal,
Whjen are you going to put the MACH .26 in your Revo?
10-05-2004, 11:00 PM
#17
Senior Member
Thread Starter
Join Date: Aug 2003
Location: Who z\' whats it,
YT, BOTSWANA
Posts: 7,133
Likes: 0
Received 0 Likes
on
0 Posts
RE: More goodies!
Yup, bought it at the Riders in Livonia (5mile, merriman).
ORIGINAL: Java
hey thermal what shop did you buy that at? just wondering i work at the Riders in livonia..
hey thermal what shop did you buy that at? just wondering i work at the Riders in livonia..
10-06-2004, 02:32 PM
#18
Senior Member
My Feedback: (10)
Join Date: Mar 2004
Posts: 1,813
Likes: 0
Received 0 Likes
on
0 Posts
RE: More goodies!
Never! As soon as i pick out a new engine for the LST i'll throw that Mach .26 in the garbage.
