Very cheap Marder from FG
#1
Member
Thread Starter
Join Date: Nov 2002
Location: Groningen, NETHERLANDS
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Hey guys, check this out....the best sold Car of Europe:
For the ultimate off-road experience, try the FG 1/6th Scale Off-Road buggy Marder. FG Modellsport, is known for the bringing highest level of quality models into the R/C world. The Marder comes 95% assembled, with motor and body. This car is powered by the Zenoah G230RC 23cc motor. Out of the box, this car is capable of reaching nearly 50mph and can stop in as little as 25 feet with the optional front disc brake kit installed. With a full tank of gas filling 0.7 liters, run times are approximately 45 minutes.
For only US$ 635
http://www.netshop.nl/shop/rc/en-us/dept_90.html
For the ultimate off-road experience, try the FG 1/6th Scale Off-Road buggy Marder. FG Modellsport, is known for the bringing highest level of quality models into the R/C world. The Marder comes 95% assembled, with motor and body. This car is powered by the Zenoah G230RC 23cc motor. Out of the box, this car is capable of reaching nearly 50mph and can stop in as little as 25 feet with the optional front disc brake kit installed. With a full tank of gas filling 0.7 liters, run times are approximately 45 minutes.
For only US$ 635
http://www.netshop.nl/shop/rc/en-us/dept_90.html
#5
Senior Member
My Feedback: (6)
Join Date: Oct 2002
Location: Denver,
CO
Posts: 1,486
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
I have seen this buggy in a local shop, and I am positive it was much more than $600.00. Tell me where I can purchase for $600.00 and I will buy two! Email me with a usa distributor that has product for the said price of 585.00 and I'll send you a finders fee. Not joking! [email protected]
#6
Member
Thread Starter
Join Date: Nov 2002
Location: Groningen, NETHERLANDS
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Hey Guys,
We have the Marders in stock and shipping to the states is no problem. The shipping costs for these cars are 40$. The total price will be 675 $.
We changed our site into english, check it out
www.krikke.net >>>> RC Modelcar Racing
We have the Marders in stock and shipping to the states is no problem. The shipping costs for these cars are 40$. The total price will be 675 $.
We changed our site into english, check it out
www.krikke.net >>>> RC Modelcar Racing
#7
Senior Member
My Feedback: (6)
Join Date: Oct 2002
Location: Denver,
CO
Posts: 1,486
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Wow! so it is true! I'll be buying two then! My local shop is trying to sell one for $1500.00!!!!!! the same one I can now get for 615. Guess who is getting my bussiness? Thanks so much for saving me 700.00+! my local hobby shop Colpar Hobbies should be ashamed of themselfs for screwing thier customers. I mean we all need to make a living, but over 150% markup? I will never buy anything from them ever again. period. How you like them apples, Colpar?
#8
Senior Member
My Feedback: (6)
Join Date: Oct 2002
Location: Denver,
CO
Posts: 1,486
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Please can anyone who has ordered from, or know of someone who has, from this company in the Netherlads (netshop) tell me if it is safe to deal with this country? I am extermely excited to get a mordar for 615.00 shipped to the USA. The cheapest one I have seen is 1,500.00!!!!!! So I am a little reluctant to believe it is really true, and dont want to loose $615.00 to find out. You can email me directly at: [email protected]
#11
Member
Thread Starter
Join Date: Nov 2002
Location: Groningen, NETHERLANDS
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Hi Guys,
We are NOT scamming any cards, we are in the Model business since 1980. The Marder is so cheap because the FG factory is only 90 miles from here. And because you are not citicens of the European community, you don't have to pay 19% taxes.
If you have a hard time finding the Marder on our site> www.krikke.net > R.C.Modelcar-Racing> take the english site > go to "cars" > go to "cars fuel engine"> and then 1:6 cars ralley and off the road.
If you have any questions : [email protected]
Ron Krikke
We are NOT scamming any cards, we are in the Model business since 1980. The Marder is so cheap because the FG factory is only 90 miles from here. And because you are not citicens of the European community, you don't have to pay 19% taxes.
If you have a hard time finding the Marder on our site> www.krikke.net > R.C.Modelcar-Racing> take the english site > go to "cars" > go to "cars fuel engine"> and then 1:6 cars ralley and off the road.
If you have any questions : [email protected]
Ron Krikke
#13
Junior Member
Join Date: Jan 2003
Location: Illinois
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
I finally ordered my Marder from Ron Krikke And received it with excellent service and advice. I live in Illinois and receive it in 9 days normal shipping.
#14
Senior Member
Join Date: Dec 2002
Location: Cyclone,
PA
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Well, thats nice thats all i have to say. Really I mean, I think I will stay with my 1/8 Ofna Ultra Lx Pro buggy. It has a .25 in it, can do 50 and it only costed me $299+$7 shipping and handleing from tower hobbies. Also, my brakes are not a problem, they will stop me pretty damn fast at full speed.
#15
Junior Member
Join Date: Jan 2003
Location: Illinois
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Buggys are cool. I have a 1/8 mugen mbxr2 with a Paris/picco that I really enjoy. However the marder is the ultimate in my opinion it has disc brakes on all four wheels with a gas 2 cycle which will run 45 min per tank and no pretuning neccessary. It is really a crowd stopper as people really are awed at it.
#16
Member
Join Date: Dec 2002
Location: Ada, MI
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Humm.
One quick question. I don't have a credit card, nor a checking account, and wanted to know if it was possible to pay with a cash on delivery? Or possibly pay in advnace?
#17
Member
Thread Starter
Join Date: Nov 2002
Location: Groningen, NETHERLANDS
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Hi DR Frunkenstein,
COD has become very expensive, but prepayment is no problem.
Contact me at [email protected] for further directions.
Ron Krikke
Holland
COD has become very expensive, but prepayment is no problem.
Contact me at [email protected] for further directions.
Ron Krikke
Holland
#18
My Feedback: (5)
Join Date: Feb 2003
Location: Dingmans Ferry,
PA
Posts: 2,077
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
Ron isn't scamming anyone!
I just ordered a Marder buggy from him. We had a problem with the first one getting lost in the mail. Ron is such a good guy he sent a second one out right away.
Here is are a few pics of what you get, and the second picture is a Marder next to an RS4.
This car ROCKS! Its' absolutely insane! I had an RC10gt that i thought was fast but this car destroys it. My RC10gt was fast but it took forever to get up to speed, but this car rips off the line just like a full sized sand rail. Its AWESOME, and i love it!
http://www.netshop.nl/shop/rc/
I just ordered a Marder buggy from him. We had a problem with the first one getting lost in the mail. Ron is such a good guy he sent a second one out right away.
Here is are a few pics of what you get, and the second picture is a Marder next to an RS4.
This car ROCKS! Its' absolutely insane! I had an RC10gt that i thought was fast but this car destroys it. My RC10gt was fast but it took forever to get up to speed, but this car rips off the line just like a full sized sand rail. Its AWESOME, and i love it!
http://www.netshop.nl/shop/rc/
#23
My Feedback: (5)
Join Date: Feb 2003
Location: Dingmans Ferry,
PA
Posts: 2,077
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
One more...
As you can see the throttle linkage in this picture is disconnected because i'm in the middle of waiting for Tower hobbies to deliver my new Metal gear servo....The first one (plastic gear) blew!
Mike
As you can see the throttle linkage in this picture is disconnected because i'm in the middle of waiting for Tower hobbies to deliver my new Metal gear servo....The first one (plastic gear) blew!
Mike
#25
Senior Member
My Feedback: (2)
Join Date: Feb 2003
Location: staten island , NY
Posts: 1,515
Likes: 0
Received 0 Likes
on
0 Posts
Very cheap Marder from FG
what are they decals on the body?
since its white, id try paints it on the outside. maye you can do a bottom to top fade. make the top stay white since its the only part that will get scrathced.
those stickers are kinda gay imo
since its white, id try paints it on the outside. maye you can do a bottom to top fade. make the top stay white since its the only part that will get scrathced.
those stickers are kinda gay imo