Which is the best rear exit exaust available for the 2.5 TMaxx
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Homestead, FL,
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Which is the best rear exit exaust available for the 2.5 TMaxx
I have learned a lot from reading the post on dual exaust and am sorry I did'nt research more before purchasing one of those (cheesy) as you guys say dual exausts from ebay. I just wanted to cut back on the cleaning time on my Maxx after a day at the park. Then when I read it may damage the engine, well lets just say I'm in the market for a good tuned pipie that exits the rear as to keep the Maxx clean of unburned nitro. I see a CVEC on ebay but am not clear as to what all is needed and how much it is worth used. Any help is greatly appreciated.
#2
Member
Join Date: Mar 2003
Location: Great Falls,
MT
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Which is the best rear exit exaust available for the 2.5 TMaxx
Check out Tower Hobbies on the net. They should have what you need. If not, I think I read that Stormer Hobbies has the kit. I've found Tower to be about the best all around site. Thats were I get all my stuff.
#4
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Homestead, FL,
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Which is the best rear exit exaust available for the 2.5 TMaxx
I just bought a cvec kit for my Maxx off ebay.(69.99) I know Tower is only 63.00 but not yet available. I'll let you know how it works out in about a week. Thanks again.
#5
Senior Member
Join Date: Dec 2002
Location: Moscow, ID,
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Which is the best rear exit exaust available for the 2.5 TMaxx
maxxdaddy, I don't know if you checked out this thread, but we just recently had a discusion about this stuff. Check it out http://www.rcuniverse.com/showthread...6&pagenumber=1
I have the CVEC z700 rear exhaust kit designed specifically for the TRX 2.5. So if you have any questions feel free to ask....
I have the CVEC z700 rear exhaust kit designed specifically for the TRX 2.5. So if you have any questions feel free to ask....