CEnMT2 flooding problem fix
 

My Mt2 will flood every time I try to start it unless it starts on hte first few pulls.
I've seen other members with the same complaint.
I think I have the fix.

The fuel line from the tank goes straight up and makes a gradual downword ark to the carb.
All the fuel in the line drains into the engine and causes it to flood if it is not running.
I have a roll bar on mine and I wire tied the fuel line so it goes uphill to the carb.
So far I've run 3 tanks and it's started in less than 5 pulls hot or cold, never stalled and idles like a mac truck.
Being that it's pitch black out now I'm callin it a hight.
Maybe just a longer line routed around the tank will work even better.