throttle problem.....maybe you know...
 

On my CEN MT2, lately I have had a problem w/ the throttle being finicky. When I get it started, I try to give it gas and the throttle just hesitates and jerks back and forth. It will never reach full throttle and when it does it is in short bursts. It is like it is twitching. I have replaced the batteries in the truck and controller, and have a fail safe on the truck. I have tried it w/ and w/out the failsafe w/ no change. I changed out the steering servo, but that shouldn't affect the throttle. I don't know what is wrong, since the truck is fairly new.

Any help or ideas will be GREATLY appreciated.

Thanks,
Branndon

RE: throttle problem.....maybe you know...
 

Have you switched the throttle servo out???

RE: throttle problem.....maybe you know...
 

hey your truck is a CEN, so your realy lucky, because when you go to the car forum, go all the way down to http://www.rcuniverse.com/forum/RC_C...mid_309/tt.htm and then click CEN. if that dont help take it to your LHS and tell them what wrong and see if they can fix it.
the only thing i can think thats wrong is the setting, or the carb is expanding alot since its probaly aluminum.

RE: throttle problem.....maybe you know...
 

thanks for the link.

no i haven't switched the t.s.

RE: throttle problem.....maybe you know...
 

Double check all your connections batt servo and the plugs on the reciever sometimes they are loose or dirty.