LRP Z.28 POWER
 

Some of you are wondering about getting a LRP Z.28 for your trucks and wanting to know the power of this thing well I'm going to have to say INSANE just see for yourself.

http://video.google.com/videoplay?do...13083287&hl=en

RE: LRP Z.28 POWER
 

LRP Spec III??

RE: LRP Z.28 POWER
 

not sure

RE: LRP Z.28 POWER
 

Is it yours, it should say on the head, Spec II or III.

RE: LRP Z.28 POWER
 

no i found it on the internet

RE: LRP Z.28 POWER
 

Ok, I thought I had observed that video before. :D

You should experience it first hand, they are great mills. :D

RE: LRP Z.28 POWER
 

I need info from someone who has install the LRP.28 spec3 on a warhead evo need to know parts need to make it work and how much mods need to be done to do so Thanks

RE: LRP Z.28 POWER
 

thats insane, that is definitly my next engine.

RE: LRP Z.28 POWER
 

here's mine on a savage x.
spec3
enjoy.:)
http://video.google.ca/videoplay?doc...arch&plindex=0

RE: LRP Z.28 POWER
 

THATS great but i'm try to hear from someone who has the LRP Z.28 SPEC III ON A WARHEAD EVO need to know what was need to be done to install it im new to this so i know very like about as far mods go to install this on my war head i know the engine has insane power i have the engine on my monsterGT so i know what its about but i want to install or have it installed on my warhead evo has anyone out there done this upgrade to A WARHEAD EVO ????????

RE: LRP Z.28 POWER
 

well why not take it out of the MGT and see if it bolts up in the Warhead evo with stock parts, it should work with stock parts, nearly all Big blocks are the same

RE: LRP Z.28 POWER
 

this should be you engine a .27 spec's on the mounting at the bottom. it should fit to the evo's mount .2 of a mm is not going to hurt.
http://www3.towerhobbies.com/cgi-bin...?&I=LXRMB8&P=Z
the lrp spec3.
http://www3.towerhobbies.com/cgi-bin...&I=LXKYU8&P=SM

i want one of those "staples button's" that was easy.:D

RE: LRP Z.28 POWER
 

OK thanks i was just wondering if there where anyone out there that has install it on a warhead evo im very green to this stuff i did install this motor on my MGT paid the LHS to do so which i will probly do on this one until i become confident with trying it on my own THanks for the come back guy any other info or bid please forward them to me ROBERT

RE: LRP Z.28 POWER
 

Hey Guys i can tell you this if you want a wheelie bar for you power house thks this the one to get the spurr bar here the link www.mdfrcwheeliebars.com my monster GT just does block long wheelies with the LRP Z.28 on it this bar is the best i've seen out look great and even work better again


( www.mdfrcwheeliebars.com)

RE: LRP Z.28 POWER
 

a tip, do all of oyur own maintainence and repair work, if your LHS does it you will never become a good hobbier, the maintainence side of things is probably %60 of the hobby or more so it's nice to know.

RE: LRP Z.28 POWER
 

YEA i know and im learning to do just that but just wanted to get some feed back and info to make sure this engine would work before i ordered another one for the warhead Thank for all your help

RE: LRP Z.28 POWER
 

Then only thing you would need to do is maybe reverse the carb, and or check that you have some clearance under the pull start. The Lrp, Mach, XTM ect... have big pull starts. On my Ofna 9.5 I hade to put spacers under the motor mount, it will fit your Warhead, I'm sure of it. Does it have a 1 peice motor mount like your MGT, or a 2 peice like a buggy? ALso if the Warhead can bump start, tere maybe a slight clearance issue as I mentioned, but the LRP quality, power, and price make it an unbeleivable value.