bigdogkanicsar

i can make a chassis for sale with no problem.
the tranny i put in it was an rc10gt tranny .
when i made the chassis i had to customize the mounting holes, but then again i had to customize the whole truck.
the only rush parts left on it is the front suspension and shocks.
everything else was changed.
a brushless coversion wouldn't be hard at all.
as far as how much would be determined on exactly what all you wanted changed.

thank you for the compliments

bigdogkanicsar

so, i didn't like the way the body fit too much so i made a roll cage for it.

dust75

hi bigdogkanicsar
i do like the look of the rollcage it looks like it needs a rear wing now[sm=thumbs_up.gif]
but every time i look at it
it looks like the air filter need a face on it [sm=spinnyeyes.gif][sm=lol.gif][sm=lol.gif]

bigdogkanicsar

it does need a wing and i have a plan for that too.
a face on the air filter?
what do you mean?
just curious

dust75

what i meant was
from the angle you have taken the photo it looks like the air filter is the driver
the blue plastic of the air filter is a helmet
and the white sponge is the drivers face

bigdogkanicsar

oh, i gotcha. ya know if i thought i wouldn't hinder the airflow ,i'd paint one on there.
thanks for the props and ideas.

PLehnertz

Nice truck. Where did you make the aluminum frame or is there a place to buy them? I'm debating rebuilding my truck or just parting it out and getting truck to tinker with. Wouldn't mind a frame like that it cleansit up niceandwould work great with my OSengine. I just have to rebuild my frontend to get it going again.

nocluewhatimdoing

Hi,

New here and trying to revive an old thread. i just pulled my old rush evo out of storeage and everything was junked up from sitting with a tank of gas in it for about 6 years. I was able to get the engine stripped down and all the old gummed up nitro fuel out of it. Engine..check..everything else seemed to be in pretty good condition still so im not going to rip anything else apart unless i have to. Now on to my question. I left the AA batteries in the battery box for the 6 years it sat in a basement/shed, and now the battery box is wasted from corrosion. Is there a rechargable pack that i can replace it with?

Thanks,

Scott

dust75

hi scott how many aa's does it take ??

Twostrokersmoker

Where can you get the gears for the differential

tyler937

Hi guys.

seen so many upgrades on the rush evo any links to where i could get some alloy parts for mine?

Thanks Sam

Traditionalist

Anyone have a stock nitro star .15fe they would sell? Mine currently has little to no compression

Goldenguzas

Anyone has graphite upper deck for rush? If so maybe you could measure dimensions of it and share it here. Planning to cut it out from carbon.

Niallwalker91

Are you still looking for a stock original engine? I have just got my old kit out the loft now that I have some extra time. I upgraded the engine straight away so this has been sitting oiled up and wrapped up safely. I ran it once then got my hands on somthing more powerful, it needs a new engine gasket being so old it just crumbled away when I inspected it yesterday.

MacAndCheese

My dad has an old HPI Rush Evo and I was wondering if there was anyone left who actually had one for parts or has parts they are willing to sell? Any help would be appreciated.

MacAndCheese

Do you have parts for the Rush Evo? I'm helping my dad restore his old car. Any help would be appreciated!