RCU Forums - ! NEED HELP PLEASE !

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Nitro Stadium Trucks (https://www.rcuniverse.com/forum/rc-nitro-stadium-trucks-243/)

- - ! NEED HELP PLEASE ! (https://www.rcuniverse.com/forum/rc-nitro-stadium-trucks-243/2367462-need-help-please.html)

Coburn

11-22-2004 07:54 PM

! NEED HELP PLEASE !

Hey guys I am going to put a order on towerhobbies tonight but need to ask one question, Will these rims fit my hpi mt-2 ?

LXDW24 Pro-Line Rear Velocity Dish 2.2" T2/3 (2)

Thanks a Bundle

FLFlyboy

11-22-2004 10:11 PM

RE: ! NEED HELP PLEASE !

i dont no you have to take in consideration if the center hole of the wheel will fit the mt2 wheel shafts you also have to take in consideration if the bearings will fit up in there so i dont no if you want to do it that bad and there cheap then go ahead and try it out.

Tucker01

11-23-2004 06:33 AM

RE: ! NEED HELP PLEASE !

Yes they will Coburn. You need to remove the HPI hex adapters, as the wheels fit straight onto the axle and pin.

Nitro Rustler Racer

11-23-2004 10:46 AM

RE: ! NEED HELP PLEASE !

Quote:

ORIGINAL: Tucker01

Yes they will Coburn. You need to remove the HPI hex adapters, as the wheels fit straight onto the axle and pin.

Frost_

11-23-2004 01:23 PM

RE: ! NEED HELP PLEASE !

Quote:

ORIGINAL: FLFlyboy

...you also have to take in consideration if the bearings will fit up in there so...

Why would there be bearings in driven wheels? You don't have bearings in the back wheels of your ST15 do you? (nope)

All times are GMT -8. The time now is 02:38 PM.