Broken Rusty, HELP!
 

I just bought a nitro rustler from a guy, using this site. I had to buy a ez start system for the .18 sirio on my rusty because the guy said the pullstart was broken. When i installed the ez start system, it didnt move the piston at all. It seemed as if the motor didnt have enough power. Also the oneway bearing seemed to small. I got that part from the pullstart. I need help! I been working on this yesterday for 7 hours straight. Dunno wuts wrong. Plz help me fix my frist nitro car.

RE: Broken Rusty, HELP!
 

Oh, i found out. The bearing looks more like a trx15 pro rather then a 2.5 one. But on the sirio site, it said that the .18 would work on the ez start 2 system. Would i need to buy a new bearing or a WHOLE NEW SYSTEM, cuz i paid 20 bux for it and it'll be a waste of money and time. Also how much would it cost?

RE: Broken Rusty, HELP!
 

dude i think that the ez start is only made for the 2.5.... why didnt u just buy a pull start. BUY A PULL START. Take the motor to a Hobby shop if u dont know what u are doing and tell them u want the parts to make it pull start. They will look at it and give u the bearing and pull start or what ever u need.

}{unter

RE: Broken Rusty, HELP!
 

the ezstart works with that engine, the ezstart 2 system works with many engines, he says that the one-way bearing he has is for a trx pro.15, just go your LHS and ask them for a one-way bearing for a ezstart system2, or even better just ask for a one-way bearing for a 2.5

RE: Broken Rusty, HELP!
 

Only pullstart they got is 60 bux, im better off buying a starter box then. Also, th front tires point kinda outward when u pus the shocks down. Oh yeah, the rear left shock seems to sag more then the other one.

RE: Broken Rusty, HELP!
 

they sag because either you need to add oil into the shock or you need new springs