Front bumper for the Firestorm
 

I was wondering if a MT2 bumper or a jato wide bumper would fit on my firestorm?

RE: Front bumper for the Firestorm
 

The bumper screws for the Firestorm are about 21mm apart.
So, we just need to find which RPM bumper would best fit that. We can drill our own holes in the bumper.

Email RPM and ask them which bumper would be best. They don't 'advertise' one for the 10T, but I'm sure they will help.

RE: Front bumper for the Firestorm
 

or check out TBR Bumpers on ebay.

RE: Front bumper for the Firestorm
 

Did you find one Nate?

RE: Front bumper for the Firestorm
 

Would this one work?:http://www3.towerhobbies.com/cgi-bin...?&I=LXKRT2&P=0

RE: Front bumper for the Firestorm
 

Or this:http://www3.towerhobbies.com/cgi-bin...p?&I=LXCXJ6&P=

RE: Front bumper for the Firestorm
 

Email RPM! :D Really, I'm sure they will be happy to help.

[email protected]

RE: Front bumper for the Firestorm
 

The first one is for a 1/18 scale rc and the RC10 may work. Like pilot said above, email RPM or go to your LHS and take your skid plate or whatever the bumper screws into with you so you can align the screws. And if all else fails, see which fits BEST and drill out the holes.

On my Evader, I had a Rustler bumper from RPM...

RE: Front bumper for the Firestorm
 

Thanks for all your help guys,I greatly appriciate it.I think I will email RPM....again.(I have emailed them before.)

RE: Front bumper for the Firestorm
 

I just saw this on Ebay -> http://cgi.ebay.ca/RC-bumper-HPI-Fir...sid=p1638.m118

RE: Front bumper for the Firestorm
 

the jato wide bumper wont fit...the mounting screws run perpindicular to the suspension arms, and im sure youve noticed the firestorm mounts run parallel with the arms....so we can rule that out lol...i would also be interested in getting a decent bumper.(preferably from rpm, my jato bumper eats anything you throw at it)