dan1220

My Feedback: (2)

is there a website dedicated to the painting of rc bodies?

Reeco

yea www.1stplacerace.com

1stPlaceRace

Thanks reeko but I dont have any "how to" sections except how to use SmarTape Lexan body masking. If you want to see some designs and color combinations we have large photo gallerys and I encourage the "borrowing" of my designs. Frankly I am flatterd when someone thinks enough of my stuff to take the time to copy it themselves. Thanks again Stan

Reeco

Your a good body painter 1stplacerace. um i got my xxxke and its nice and i still need to piant the body but i dont think i know how. but ill try to make a fire one . and im srry i thought you did have the how to on ur page but you got nice bodys

1stPlaceRace

reeco, Buy a parma flames masking sheet. If you want to do a wrap around flame like I do I can tell you how. Take the parma flame masking and place it around the nose and down the sides. There are many different ways to apply the flames because there are lots to choose from. Make sure they are all about 1/2 inch away from each other. After they are all placed draw on the outside of the body with a overhead projector wet erase marker. You will only be drawing the loops that connect the flames at the front of the design. After you have marked them, put a heavy coat of liqiud mask on the front of the pattern up to where you have drawn your loops. Once it dries all you have to do is cut the liquid mask at the few spots where you drew your flame connecting loops.

Reeco

Cool thx alot 1stplacerace.

Illyakuriakin

There's also TeamDuze

They painted my Dodge Ram:

Hockey07

Nice sites I like the http://www.1stplacerace.com/Paint%20...25/stratus.gif body and http://www.1stplacerace.com/Paint%20...32803-021S.gif and http://www.1stplacerace.com/Paint%20...20802-020S.gif bodies lol Painted nicely

Jackstraw

My Feedback: (1)

Here's some good information:

http://www.rctech.net/articles/paint...ntedmyst.shtml