|
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Xtra-2000 (model by Dennis van den Tooren). Most F3A flyers here still use this in our competition (Netherlands). Wood build, powered by OS-160. Weight 4.9 kg. Great flying plane!
|
RE: post some pictures of your pattern plane!!
I am wandering, does anyone know where I can get an eclipse pattern plane? Thank you |
RE: post some pictures of your pattern plane!!
|
RE: post some pictures of your pattern plane!!
1 Attachment(s)
The new Shinden by Bryan Hebert that will be sold by BVM Props.[sm=wink_smile.gif]
|
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Not long been flying Pattern . . but liking it a LOT ! ! Managed to pick up this Arresti in the box cheap, and it flies unbelievably well I managed a promo point with it after only 2 brief flights before the comp !.
Has OS160FX on a Hyde 'Firm Idle' mount (custom made for me by Merle Hyde ;)) and a Aeroslave Carbon pipe (copied Aerobob's set-up). JR RS10DS receiver, and JR digitals . . oh . . and swaped out the heavy aluminum landing gear for Bolly Carbon. One of the pics you can notice the engine on an angle? This is to fit the side exhaust header withing the cowl. |
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Abbra
|
RE: post some pictures of your pattern plane!!
1 Attachment(s)
El Tiburon |
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Sorry, couldn't resist this great thread. My new plane for 2007', The Pentathlon.
|
RE: post some pictures of your pattern plane!!
I couldn't help but notice the little fin on top of the canopy. Looks like someone's been to Nat Penton's school of aerodynamic theory? Nice looking plane. I'd post pictures of mine, but if you've seen one Genesis, you've pretty much seen em all.
|
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Hydeout :D
|
RE: post some pictures of your pattern plane!!
ORIGINAL: mjfrederick I couldn't help but notice the little fin on top of the canopy. Looks like someone's been to Nat Penton's school of aerodynamic theory? Nice looking plane. I'd post pictures of mine, but if you've seen one Genesis, you've pretty much seen em all. mj, Have a look here: http://www.insightrc.com/ It shows lots of pics and a link to the RCU thread about the Pentathlon. Mark (Not the designer, another one...) |
RE: post some pictures of your pattern plane!!
I knew I'd seen that ship somewhere. Great looking plane!
|
RE: post some pictures of your pattern plane!!
Pablo
|
RE: post some pictures of your pattern plane!!
steve, you and plane look great together.best of luck in ocala
|
RE: post some pictures of your pattern plane!!
Ah man, I wish I could share some of my pictures with you ,but the net work here in this part of Africa is ....
Can anybody help, pattern guys always help each other .Just want to pay tribute to my friend who painted it for me. [:@][:o]:eek: Gerrie |
RE: post some pictures of your pattern plane!!
1 Attachment(s)
My FIESTA ,-Partner with 3D control survices. YS 160 ,Futaba 12Z.
GERRIE |
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Genesis with metalic plum tips.
|
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Post your pattern plane pictures...
Here is my new Oxai Zeque (YS DZ 160, APC 17 x 12) and Oxai Beryll (Hacker C50 14XL, APC 20 x 15 and 20.5 x 14 pre-production sample from Chip Hyde), kits available from Central Hobbies and the ill-fated Piedmont Focus II (YS DZ 160, APC 18.1 x 10). Futaba 9154 aileron servos with Futaba 9155 for rudder on Zeque and Beryll. The Focus II uses Futaba 9550 for ailerons and 9151 elevator and rudder. Each model uses Jaccio 6 volt "fail safe" switch/regulator and Thunder Power 2S 910 mah for Beryll and 1320 for Zeque and Focus II. See other RCU threads "Phoenix in Feb" and "Zeque Build GLow Powered" for additional details and flight reports. Rusty Dose Team Futaba Team YS Performance |
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Oxai Infinity with YS 160DZ after first flight using APC 16.5 x 12 w, 2 x JR8411 aileron, JR8511 rudder, 2 x JR DS362 elevator uses Jaccio 5.6 volt "fail safe" switch/regulator with 2cell Lipo 1800MA
|
RE: post some pictures of your pattern plane!!
Here's my latest, she's a little old and beaten up, but a good test bed nonetheless. It's a Zytec 2, originally set up for an OS 140 rx.
MVVS 160 ignition engine with Karl Meuller header, and mvvs pipe. DS8231's on ailerons and elevator DS8511 on rudder, Jr 361 micro on throttle. Hitec HS75BB on retracts. 2000mAh 5 cell flight pack 900mAh 6 cell ignition pack Weigh's 4.5kg http://image.rcuniverse.com/forum/th...34/Nl29891.jpg http://image.rcuniverse.com/forum/th...34/Xs57066.jpg more details in the Gas pattern Build thread |
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Post some pictures of your pattern (practice) plane!!
This IS a stretch...I just received the photos...and I just had to share a photo or two of my new toy by Raiko Potter...a very cool "Stick Plane". This is to a stick plane what the Ferrari is to the motor car...WAY OVER THE TOP! Raiko is the 2007 USA F3A Team Assistant Manager and is just about the most creative person I know...so he agreed to build the prototype for the soon to be announced "Official 2007 USA F3A Team Stick Plane Contest" using the "Official" prototype template/pattern (See "Be a part of the 2007 USA F3A Support Team" thread on RCU). Raiko cut this out of 1/8" plywood and MONOKOTED IT!!!! I just think it is awesome and look forward to receiving it and fighting over it with my tiny boys... What's the airplane?...a Focus II. Rusty Dose Team Futaba, Team YS Performance 2007 USA F3A Team Fund Raising Coordinator:) |
RE: post some pictures of your pattern plane!!
1 Attachment(s)
Black Magic VF3 prototype. fast and dirty one day monokote scheme, for maximum visibility, no "bling".
More elsewhere soon. This one levels the paying field. Utterly. -Mike |
RE: post some pictures of your pattern plane!!
Mike,
I was going to order a V2 but after seeing thoes pics I think I'll wait a little longer and go for teh V3. That bird is sexy.:D:D |
RE: post some pictures of your pattern plane!!
Man, that's really great Mike Will the plane be light enough for an Axi E. setup? Thanks
|
RE: post some pictures of your pattern plane!!
1 Attachment(s)
My new plane a TS Composite Oxalys!
Futaba 12z and mixed JR and Futaba servoes all digitals. YS 160 DZ on Hyde ARA and original Ys front mount. Weight 4900...to much but... flies nice . was out today 4 flights and first day with no problems with backfires or other things, first times to use a YS and its some diffrent to the OS 140rx i have been using the last seasons.:D still some ice and snow around the field but it will melt in a week or so ! |
| All times are GMT -8. The time now is 05:13 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.