Hello Will

Harmonie is a scratch built from plan.
I can send you files if you give me your mail adress.
Claude

Arf airplanes are not kits, they never will be,i build all my own aircraft from kits only.they fly really nice mostly, well I guess its gonna be hard locating a pattern ship to build.I will keep you all posted.

Hi Claude,
I sent you a pm with my email address.
Thanks,
Will

Hello Will

I just send you files.
Some examples of scratch built Harmonie made by friend :

http://www.rcuniverse.com/forum/atta...mentid=2022533http://www.rcuniverse.com/forum/atta...mentid=2022534http://www.rcuniverse.com/forum/atta...mentid=2022535http://www.rcuniverse.com/forum/atta...mentid=2022536http://www.rcuniverse.com/forum/atta...mentid=2022537http://www.rcuniverse.com/forum/atta...mentid=2022538http://www.rcuniverse.com/forum/atta...mentid=2022539http://www.rcuniverse.com/forum/atta...mentid=2022540

nice pics

Two current .... one Suprafly 60 .... and a modern Dirty Birdy....

http://www.rcuniverse.com/forum/atta...mentid=2022568http://www.rcuniverse.com/forum/atta...mentid=2022569

Here's mine. I bought it in this condition. Glass fuse w/ sheeted foam & glassed wing. Came with new speed .61, new header and old pipe.
Has Kraft wheels, fixed gear. Never finished, no holes for push rods and no mount for aileron servo.
I plan to finish it someday.

Desire 60 scratch built from Flying Models plans (Mike McConville). Converted to e-flight Power 90 on 8c, ESC CC 80A HV, APC 17x12, 1800w. Weight 8.2 lbs.
Flies the Advanced pattern at 7,200 ft ASL.

http://www.rcuniverse.com/forum/atta...mentid=2022859http://www.rcuniverse.com/forum/atta...mentid=2022860

Hope they kit this one....

Niall,
I can understand your desire to see this kitted.
It has to be your best effort so far - looks like you have made some effort to get the thrust line right and that you have paid particular attention to the lateral balance :D

Brian

WOW...A real looker! Does it fly as good as it looks???

Hi Claude
I also sent you a PM asking for the files.
[email protected]
Thanks

Hello

Maiden flight for Eric's Harmonie I built for him.
claude

http://www.rcuniverse.com/forum/atta...mentid=2110519http://www.rcuniverse.com/forum/atta...mentid=2110520http://www.rcuniverse.com/forum/atta...mentid=2110521http://www.rcuniverse.com/forum/atta...mentid=2110522http://www.rcuniverse.com/forum/atta...mentid=2110523http://www.rcuniverse.com/forum/atta...mentid=2110524http://www.rcuniverse.com/forum/atta...mentid=2110525http://www.rcuniverse.com/forum/atta...mentid=2110526http://www.rcuniverse.com/forum/atta...mentid=2110527http://www.rcuniverse.com/forum/atta...mentid=2110528http://www.rcuniverse.com/forum/atta...mentid=2110529http://www.rcuniverse.com/forum/atta...mentid=2110537

Nice work! Claude

Hi Claude,

Are there any videos of the Harmonie with the gas engine in flight?

Best regards

Alejandro

My Phase One, still haven't flown it but plan to campaign it next season in advanced.

Rick H.http://www.rcuniverse.com/forum/atta...mentid=2110602

Jon Wold, thats a wicked colour/graphics scheme! So much more refreshing than all the french curves and nauseating multi colours in vogue.
This has a graphic IDEA! Brilliant.

Hi Claude
I sent you a PM

Regards

I've been reviewing this thread for quite some time (yeah, started at the beginning) and after seeing all these outstanding planes with their long sleek fuselages and thin wings I thought I'd just throw in two more cents' worth.

I'm no kind of pattern flyer - have never competed and the best I've ever done in practice is novice class, and even not great at that level - but I plans-built an old pattern plane from long ago, the 1966 SIG Stratus, and thought I'd just throw it in here for "historical" interest. By today's standards I doubt she'd last even a minute in competition but a guy named Maxey Hester designed & competed with it a long time ago. She's short-coupled, thick-winged and no kind of show plane but she IS an awful lot of fun to fly.

Sorry about the lousy flight shots. Cheapie camera only does so well.

http://www.rcuniverse.com/forum/atta...mentid=2111875 http://www.rcuniverse.com/forum/atta...mentid=2111876 http://www.rcuniverse.com/forum/atta...mentid=2111877 http://www.rcuniverse.com/forum/atta...mentid=2111878 http://www.rcuniverse.com/forum/atta...mentid=2111879

STRATUS, SIG kit #RC4 from 1966
WS - 70", Length-51.5", wing area 720 sq. in., 7.8 lbs
Power is an OS.60SF and she's got a basic 72MHz Futaba 4-ch radio

She looks great! Awesome plane.

Hello

Friends's planes :
Claude
http://www.rcuniverse.com/forum/atta...mentid=2127862http://www.rcuniverse.com/forum/atta...mentid=2127863http://www.rcuniverse.com/forum/atta...mentid=2127864http://www.rcuniverse.com/forum/atta...mentid=2127865http://www.rcuniverse.com/forum/atta...mentid=2127866http://www.rcuniverse.com/forum/atta...mentid=2127867http://www.rcuniverse.com/forum/atta...mentid=2127868http://www.rcuniverse.com/forum/atta...mentid=2127869http://www.rcuniverse.com/forum/atta...mentid=2127870

My recently purchased snapdragon. It was a prototype for f3a unlimited.

Thanks chris for selling it to me.
http://www.rcuniverse.com/forum/atta...mentid=2128075http://www.rcuniverse.com/forum/atta...mentid=2128076http://www.rcuniverse.com/forum/atta...mentid=2128077http://www.rcuniverse.com/forum/atta...mentid=2128078

Hi Claude,

According to the CB website, it looks like the Phoenix comes in a glow version? Do you know who's the designer is, & whether the price is 749.00 Euro plus shipping to US?

Thanks,

Adrian

oh and here are some photos from the district 2 championshipshttp://www.rcuniverse.com/forum/atta...mentid=2128079http://www.rcuniverse.com/forum/atta...mentid=2128080http://www.rcuniverse.com/forum/atta...mentid=2128081http://www.rcuniverse.com/forum/atta...mentid=2128082http://www.rcuniverse.com/forum/atta...mentid=2128083http://www.rcuniverse.com/forum/atta...mentid=2128084http://www.rcuniverse.com/forum/atta...mentid=2128085
Note that the caelus isn't mine.

Enjoy the Snapdragon Sam. You will love it. Nice shots of some of the other planes.

Arch

I got the RX installed, the cables organized, the rx battery charged, and some mild rate on all surfaces. This weekend is looking nice for a maiden.

Also I gave it 12 degrees on all surfaces for low rates and 15 for high. Since you've flown(and in part designed) the plane what do think of the rates?

-Sam

Oh and i didnt take the photos, my dad did.

I would tone the rates down a little for Sportsman. 10 degrees on ailerons elevator. Then you will need high rate rudder for stall turns.

Arch

I'll set it to 10 degrees before I maiden it. For rudder I have around 20 on low and around 35 on high.

Oh I found a photo of my typhoon(before the crash) that crashed due to a bad battery connection.
http://www.rcuniverse.com/forum/atta...mentid=2128103
It's from phoenix models. Wouldn't recommend it, wasnt very stable, somewhat heavy, and didn't fly very well.

-Sam

my creation. Planning and building self

Hi Adrian

I asked Benoit Chauvet about your request.
I'm waiting answer.
Pics of Phoenix glow (yamada) and Gas engines :
Claude

http://www.rcuniverse.com/forum/atta...mentid=2128385http://www.rcuniverse.com/forum/atta...mentid=2128386http://www.rcuniverse.com/forum/atta...mentid=2128387http://www.rcuniverse.com/forum/atta...mentid=2128388http://www.rcuniverse.com/forum/atta...mentid=2128389

Great work! I am all for self designed Pattern models. The wing design will produce a superior flying model

Thank you MattK

Hello

Maiden flights for my new Harmonie. It's an evolution2. Fuse is higher then the others. So I'm very happy with.
Flight lines are very accuracy. Plane is very stable and easy to handle.
Engine YS 175CDI (9% oil, 25 % nitro), propeller APC 20x10.5, weight is 5080 g.
Claude

http://www.rcuniverse.com/forum/atta...mentid=2143384http://www.rcuniverse.com/forum/atta...mentid=2143397http://www.rcuniverse.com/forum/atta...mentid=2143398http://www.rcuniverse.com/forum/atta...mentid=2143385http://www.rcuniverse.com/forum/atta...mentid=2143386http://www.rcuniverse.com/forum/atta...mentid=2143399http://www.rcuniverse.com/forum/atta...mentid=2143387http://www.rcuniverse.com/forum/atta...mentid=2143388http://www.rcuniverse.com/forum/atta...mentid=2143389http://www.rcuniverse.com/forum/atta...mentid=2143390http://www.rcuniverse.com/forum/atta...mentid=2143391http://www.rcuniverse.com/forum/atta...mentid=2143392

Well Matt, if you like off the beaten path you should really love what I plan to fly pattern with next season.

Nice, clean lines Claude. Well done.

??... Not sure what you mean, Shawn. Bipes have been flown for some time.
And mine are not that far from the beaten path. I didn't think that fellows plane was either.

My wing design has been different for many years but that's it. Petrol, I suppose..... Hanson did a little of that a couple years before me. Of course now we have light and powerful petrol engines from several sources so it's so much simpler.

Hello

Maiden flights for new e-Harmonie I built for a friend. Motor Hacker Q80, battery Hacker 5000 mAh.
No mix rudder/elevator, no mix rudder/aileron.
Claude

http://www.rcuniverse.com/forum/atta...mentid=2169492http://www.rcuniverse.com/forum/atta...mentid=2169493http://www.rcuniverse.com/forum/atta...mentid=2169494http://www.rcuniverse.com/forum/atta...mentid=2169495http://www.rcuniverse.com/forum/atta...mentid=2169496http://www.rcuniverse.com/forum/atta...mentid=2169497http://www.rcuniverse.com/forum/atta...mentid=2169498http://www.rcuniverse.com/forum/atta...mentid=2169499http://www.rcuniverse.com/forum/atta...mentid=2169500http://www.rcuniverse.com/forum/atta...mentid=2169501http://www.rcuniverse.com/forum/atta...mentid=2169502http://www.rcuniverse.com/forum/atta...mentid=2169503

Another Extreme Flight Vanquish V2
http://www.rcuniverse.com/forum/atta...mentid=2169545http://www.rcuniverse.com/forum/atta...mentid=2169546
Hacker A60-7S V2. Gens Ace 90A HV ESC. 20x13 apc prop.

Made by Jaroslav Mach. He called M14. When I asked him why M14 he responded you pick a name. Since JM is such a good builder I decided to called Daedalus. However, I mixed with Spanish so called Dedalus. [ATTACH]2170639[/IMG]http://www.rcuniverse.com/forum/atta...mentid=2170640

[ATTACH]2170779[/IMG]

Probably boring but... I am very happy with it. :D

BJ Craft Episode with Pletty Advance 30-10, YGE90, 3 blade PT20x13, JR8411 rudder, 2xBLS153 elevator, 2x BLS171 (?) aileron. Extremely smooth flyer with the Advance and three blade.

Volkert

[ATTACH]2170780[/IMG]


EDIT: Struggling here! Cannot upload from my iPad....