RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Pattern Flying (https://www.rcuniverse.com/forum/rc-pattern-flying-101/)
-   -   post some pictures of your pattern plane!! (https://www.rcuniverse.com/forum/rc-pattern-flying-101/1157858-post-some-pictures-your-pattern-plane.html)

bokuda 11-01-2004 09:40 PM

RE: post some pictures of your pattern plane!!
 
Who makes/sells the Matrix?

Imac Kiwi 11-02-2004 12:49 AM

RE: post some pictures of your pattern plane!!
 
Ewan Galloway in New Zealand

[email protected]

I have a spare kit for sale with wings and tail feathers skinned set up for YS 140L/DZ with factory soft mount. PM if interested.

Alan

Chris-B-chips 11-02-2004 01:11 AM

RE: post some pictures of your pattern plane!!
 
i love my matrix!! it flies great but i havn't had much time on it. i was given a dud 140dz that never keeps the same setting and barley produces enough power to fly the F3A sequence.

esweber 11-02-2004 07:27 AM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
Here is my OMS

smchale 11-02-2004 09:30 AM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
A couple pics of my well-used Boxer 120. 'Man's best friend' has been flying since 1998.
The green plane is my own design from a few years earlier...the Talon...it's just a simple 4-channel sport plane with good flying characteristics. Flys off both land and water.

Wildstyle 11-14-2004 04:43 AM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
Here is my new 2x2 pattern model, I acquired it from a top pattern flier over here in New Zealand for a good price (Free) to get me in to pattern with low cost. I decided to recover the airframe as it was a bit dirty and the covering was lifting in places. the model is home built and is designed around the Gator Typhoon although it doesn't look that close to a typhoon:eek:.

Equipment used
OS 140RX
4X DS9411
DS8411
Bolly 590R Muffler (seven chamber muffler, not a pipe)
Tru turn spinner, tettra and all of that other expensive gear.

Should be ready to fly next weekend, Anthony.

Imac Kiwi 11-14-2004 06:38 AM

RE: post some pictures of your pattern plane!!
 
Hey Wildstyle

That looks like Ted's old Matrix next to your Typhoon

Wildstyle 11-14-2004 02:00 PM

RE: post some pictures of your pattern plane!!
 
Yep It is Teds old Matrix but is now Brian Averys. Brian picked the plane up on Saturday from the taupo pattern meeting, I didn't go but I did have lots of FUN at work[:'(][:'(].
Anthony

mr.bigal 10-27-2005 01:31 AM

RE: post some pictures of your pattern plane!!
 
hey im navaro im buliding a quest write now and im going to put a ys120 is that a good powere.also i have a couple of questions on the buliding part. if ypu could email me on some tips it would be great. thank you :D:D:D

bridiXLT 10-31-2005 05:50 AM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
Here is my pattern plane nothing too fancy its a hobbico spectrum that i recovered.its got a gms.40 on a pipe

checho4 10-31-2005 12:00 PM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
here is my leo and DASH FIVE.

oxai 11-29-2005 08:11 AM

RE: post some pictures of your pattern plane!!
 
My pattern models

http://www.rcdream.net/uploadImages/...2621017567.jpg

http://www.model-dream.net/bbsphoto/041212sjl/6.jpg

acabrera11 11-29-2005 12:15 PM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
My Boxer .60 with .75 Towerhobbies and Futaba 9 Cap.

4* 11-29-2005 07:21 PM

RE: post some pictures of your pattern plane!!
 
Slightly modified Sea Bee. Saito .72

PatternCombatKid53 11-29-2005 08:58 PM

RE: post some pictures of your pattern plane!!
 
Hi,
Has anyone bought PL Products 2M pattern planes in the "kit" form. If so,what was it like right out of the box(aka, how much building, what needs to be done). Anybody have pictures of what they come like. I'm looking at getting a plane from PL Products myself and I am trying to get as much info as possible.

Thanks,
Doug

snap_roll 11-30-2005 01:01 AM

RE: post some pictures of your pattern plane!!
 


ORIGINAL: navaro

hey im navaro im buliding a quest write now and im going to put a ys120 is that a good powere.also i have a couple of questions on the buliding part. if ypu could email me on some tips it would be great. thank you :D:D:D
hi navaro, i think the YS120 would be a little too heavy for that plane, a YS110 would be better;)

balsabuster2003 11-30-2005 11:56 AM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
Derringer. Probably 20+ years old. Note anhedral horizontal stabilizer. Magnum .91 XL. Gets small real fast! Need to hone up on my flying skills before I fly this one again! Tried a $10 3-blade 12x8 prop for ground clearance. Lasted 1 flight. Back to 2-blade 13x8 prop. Coroplast Spadet in background flys itself. Not so with the Derringer. Requires much attention.[img][/img]

jabowil-RCU 11-30-2005 11:58 AM

RE: post some pictures of your pattern plane!!
 
If you have the 120 YS I think it would fly well. I would give it a try. I've heard of people that have used 140 YS on the Quest.

MHester 11-30-2005 12:11 PM

RE: post some pictures of your pattern plane!!
 
Now that's a trippy looking plane! You should finish it up and fly it for sure!

-Mike

mtcarey 12-04-2005 11:58 PM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
Icepoint with YS 140 & Carbon Fiber pipe
Zen 90 with YS 120

OhD 12-05-2005 02:29 PM

RE: post some pictures of your pattern plane!!
 
Where did that fuselage come from? It looks like a plane I had back in the 70s called the Stiletto. I had the molds for many years and sold them or gave them away in the mid 80s.

Jim O


ORIGINAL: balsabuster2003

Derringer. Probably 20+ years old. Note anhedral horizontal stabilizer. Magnum .91 XL. Gets small real fast! Need to hone up on my flying skills before I fly this one again! Tried a $10 3-blade 12x8 prop for ground clearance. Lasted 1 flight. Back to 2-blade 13x8 prop. Coroplast Spadet in background flys itself. Not so with the Derringer. Requires much attention.[img][/img]

balsabuster2003 12-10-2005 01:23 PM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)


ORIGINAL: OhD

Where did that fuselage come from? It looks like a plane I had back in the 70s called the Stiletto. I had the molds for many years and sold them or gave them away in the mid 80s.

Jim O


ORIGINAL: balsabuster2003

Derringer. Probably 20+ years old. Note anhedral horizontal stabilizer. Magnum .91 XL. Gets small real fast! Need to hone up on my flying skills before I fly this one again! Tried a $10 3-blade 12x8 prop for ground clearance. Lasted 1 flight. Back to 2-blade 13x8 prop. Coroplast Spadet in background flys itself. Not so with the Derringer. Requires much attention.[img][/img]

[img][/img]

Here's a picture of the front cover of the assembly instructions. The plane probably came from the Los Angeles area. [img][/img]

Zeneith 12-13-2005 01:36 AM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
Here are my New Mage Model Beam!

Dominique ACM 12-13-2005 06:23 AM

RE: post some pictures of your pattern plane!!
 
hello Zeneith,

Could you please give us more informations about this Model (Beam) ?

DG

flyjohn 12-15-2005 12:51 AM

RE: post some pictures of your pattern plane!!
 
1 Attachment(s)
[img]Here's my Sword. OS 1.60 w/ Karl Mueller header on power pipe 16x12 prop


All times are GMT -8. The time now is 03:56 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.