RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Pattern Flying (https://www.rcuniverse.com/forum/rc-pattern-flying-101/)
-   -   Biplane vs monoplane (https://www.rcuniverse.com/forum/rc-pattern-flying-101/11642593-biplane-vs-monoplane.html)

kenh3497 10-27-2017 06:52 PM

Biplane vs monoplane
 
It seems biplanes are all the rage in pattern these days.

What is the advantage of a biplane vs a monoplane? I'm asking because I have no idea. Seems like a LOT more setup to make one fly right and from my perspective a possible weight DISADVANTAGE because of the second wing.

I'm not trying to start a war. I just want to understand why.

Ken

speedracerntrixie 10-28-2017 06:59 AM

Ken, there are 4 reasons why a bipe made sense to me.

1. More wing area/ lighter wing loading. If I was to do the same by just making a single wing larger the airplane would suffer in roll performance especially in snap rolls.
2. The two wings help straighten the prop wash prior to reaching the tail. This helps with tracking.
3.Higher drag profile. Drag at the right location is good IMO. It helps with keeping constant speed and helps with tracking as well. The downside is you need to make sure you have the power to overcome the drag.
4. I just think they look BADASS.......


I'm hopeful that some more experienced higher level patter pilots will give more information but those were what I am thinking as I go through the construction of mine.
Yes weight is a big concern however the wings are smaller, much thinner because they don't need to be quite as strong. When assembled the wings form a box structure and gain strength. As I said in my build thread I think we overbuild our models anyways. A big eye opener for me was picking up a buddies CK Alure, very light construction.

can773 10-30-2017 07:19 PM

The main reason is the knife edge performance, the biplanes have an advantage over most if not all monoplanes (canalizer or not).

For guys flying the FAI F sequence, and unknowns the biplanes make many elements of those sequences a bit less work to fly.

That said, they make a lot of simple maneuvers like flying in a straight line harder due to the fact they just go exactly where they are pointed, and if you make a rudder correction incorrectly it will really stick out :)

The lighter wing loading does help in certain situations but also hurts in others (turbulence).

At the end of the day, I think everyone flies best what they are most comfortable with...mono or bipe. In order to figure that out you just have to buy both and fly them a lot :). At least thats what I tell my wife lol.

Chad

speedracerntrixie 10-30-2017 07:29 PM

Very well said Chad, especially the bit about practice. The more stick time you invest in a well flying airplane the better you will do. Most of us don't need the latest/greatest to gain an advantage, lots of practice is the advantage regardless of the airplane ( trimmed to full potential of course ). A good example is the fact that out of the 4 contests I flew in this year in advanced I was an average of about 30 points out of first while flying an electrified Hydeaway. I was however practicing at least 20 flights the week prior to the contest.

Tom33k 03-22-2026 02:34 AM

My biplane
 
https://cimg1.ibsrv.net/gimg/www.rcu...55bea5613f.jpg
hi friend this is my vintge biplane engine o.s 15 la


All times are GMT -8. The time now is 02:32 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.