European Championship 2008 - Brescia Italy
 

Hi there,

I know that it is a bit early but I open this thread for the above event. It would be nice if we shared some information here about it equipment to be used, how to get there etc.

I am very glad and excited as this will be my first international participation as a flier and I hope the same will be for all particpants too.

Here is the offical web link for the event:

http://www.aereomodellismo.org/

So let's start!:)

Best regards,
Nikos

RE: European Championship 2008 - Brescia Italy
 

The Turkish national F3A competition will be on the 1st of June and the first 3 will go to European Championship in August. I am practicing quite a lot for our nats and hope to be able to finish in the first 3 so that I too can go to Italy as part of the Turkish team. There are really good fliers here, it will be tough to beat them but I'll do my best.

If I can manage to be in the team I'll see you there Nikos ;)

Alp

RE: European Championship 2008 - Brescia Italy
 

Best of luck Alp! Hope to see you there!

Nikos

RE: European Championship 2008 - Brescia Italy
 

Hi Nikos,

Really good idea!

This european Championships in Brescia will be my 3rd participation in a international F3A champ for Spain. Infortunatelly this year I will be the only spain pilot.

My arms :D :

2 Beryll EP with AXI 5330/F3A - JETI SPIN 99
JR 9303 2,4.

And you Nikos, what's your material?

regards

RE: European Championship 2008 - Brescia Italy
 

Turkish national F3A contest was held yesterday. I became the 3rd and I'm in the team :D

The team members are:
1- Ahmet Eryildirim
2- Serdar Salta
3- Alpaslan Bak

All our planes are Impulse and we all use OS140RX.

Alp

RE: European Championship 2008 - Brescia Italy
 

Hallo Juan,

Nice plane, I am attending the event with two planes:

- ZN Line Synergy - YS 160DZ
- CARF Integral - YS 170DZ (Main plane)

The other member of the team will be participating with:

- ZN Line Oxalys which can be powered by either a Hacker C50 or a YS-160DZ, the plane can be converted from glow to electric in 10 minutes.

Radio equipment: JR

Hope to see you there,

Nikos

RE: European Championship 2008 - Brescia Italy
 

OK... where's the pics on how all this works???

RE: European Championship 2008 - Brescia Italy
 

Hi Jason,

The pilot, Elias actually can provide info here. On this plane he has tried various power plants such as Cyclon, Pletenberg, Hacker and YS. Currently he flies YS. I think he sticks a firewall extension on the main firewall and then screws the Hacker motor stand. The battery sits at the short pipe area. I don't have any picture of the Hacker motor installation. Here is the YS and the previous Cyclon configuration

Rgrds,
Nikos

RE: European Championship 2008 - Brescia Italy
 

hello


I plan to compete is ths championship
I noticet thet 72 mhz frequency allowed is not nonexisting frequency (72:080, 72:240)
the frequency that I know are odd number start fom 72:010 in difference of 20 khz (the next is 72:030 )
until 72:990

is it a mistake?

http://www.aereomodellismo.org/pdf/B...dE%20F3A07.pdf

RE: European Championship 2008 - Brescia Italy
 

Thank you for the pics Nikos. That is interesting. It would have to be a bit different if it was a 2 piece wing set-up I think. I like the stand-off/full adjustable mount for the electric.

RE: European Championship 2008 - Brescia Italy
 

You are right, those are the old wide band, there must be an error there, unless someone request to use that, if so, I don't want to even see their radios. :)

RE: European Championship 2008 - Brescia Italy
 

Hallo all
I follow almost all the discusions but this is my first post here.
Sorry for not replying earlyer ,I had an F3D race in CZ last week and was busted with preparations (Randy Bridge was there too !)
About the setup ,Nikos posted some pics of the tests I did earlyer with various setups ,starting with Plett 13 ,Cyclon F3A ,Hacker.
The plett setup was the lightest of all ,horizontal manouvers where a joy !,Cyclon was extremely powerfull but was killing the batts,it was also as heavy as Hacker maybe more ,sorry for not having numbers ,I have some in my workshop.The cyclon setup you see was from a pic I sent to friends making a joke with two pack sets put in to the plane .The mount was universal for all outrunner tests.
The Hacker setup uses a front mount with Hatori Heli muffler soft mouts (silicon) .A similar mount but with a big hole is for the nose ring of the YS setup.
I promise some pics as soon as I take out my engine for cleaning (every 50 flights or so) it should be close.
Now I go practice... it`s a nice sunny day here !
It`s really nice to talk to you all through here

Elias Sopeoglou
Ps pics are coming soon

RE: European Championship 2008 - Brescia Italy
 

RE: European Championship 2008 - Brescia Italy
 

RE: European Championship 2008 - Brescia Italy
 

Hi there,

Let's make this thread more live, the clock is ticking...till next week.

Here are some pics from our practice, practice is never enough though...:)

Nikos

RE: European Championship 2008 - Brescia Italy
 

Hi
Of course I will be there, leaving Norway on Tuesday. I will use my new Integral, as shown in attached pictures

RE: European Championship 2008 - Brescia Italy
 

Good luck Ole old chap!
Good to see the Inte' wearing ofremmi colours... at last.

RE: European Championship 2008 - Brescia Italy
 

Looks good Ola. Good luck!

RE: European Championship 2008 - Brescia Italy
 

That looks like a serious day of practice... not the pilots, they look so relaxed ;)

RE: European Championship 2008 - Brescia Italy
 

Nice/Serious day and nice/serious place, me in the middle at least can not be that serious :). Just want to have fun, watch the rest of the pilots flying and keep some notes, it is my first participation with the team anyway...[8D]

Ola nice plane, is it the one with the Synergy wing and stabs?

Happy practice to everyone,
Nikos

RE: European Championship 2008 - Brescia Italy
 

Hi Ola

We miss you here in Israel.

I see that you use only one servo for the elevator.
Can you explain why not two servos in the tail ?

Best regards and good luck in the European Championship.

Isaac Najary

RE: European Championship 2008 - Brescia Italy
 

Hello again
Thanks for the kind words, I will try to do my best. It's not getting easier to get a good results, there is a lot of pilots flying very good these days.
Regarding the Integral, the stab is actually a Synergy stab, for no other reason than that I had a set of foam-cores laying around. The wing is foam also, same planform as original Integral, but with the same airfoil thickness all the way from root to tip ie. thinner at tip than original.
Isaac : I enjoyed visiting you all, there is a team from Israel coming to the EC also, is it not ? I prefer the single full-size servo for several reasons:
- The bigger servos are more robust and precise
- I prefer to have the weight closer to the CG, servos in the tail moves mass far awy.
- The total weight is lower with one servo, the long cables from RX to the tail-mounted servos are fare heavier than wire pull-pull to the MK bellcrank.

Best regards

RE: European Championship 2008 - Brescia Italy
 

Hi Ola,

Thank you for your answer.

The team from Israel for the EC will be:

Ohad Zarko - national champion.
Shelomi Chester.

Regards,

Isaac Najary

RE: European Championship 2008 - Brescia Italy
 

I think that in a couple of days the Euro F3A will start.


PICTURES ARE WELCOME.

RE: European Championship 2008 - Brescia Italy
 

Yea, who's going to be posting the results, pictures and videos ;) during the practice and contest? Since I'm stuck indoors with no chance to practice anytime soon (Hurricane wanna-be Fay) I've got nothing to do except watch this thread for updates :D.

Best of luck to everyone and looking forward to the reports of the new planes being flown.