RCU Forums - OS or YS in Cad

RCU Forums (https://www.rcuniverse.com/forum/)

- RC Pattern Flying (https://www.rcuniverse.com/forum/rc-pattern-flying-101/)

- - OS or YS in Cad (https://www.rcuniverse.com/forum/rc-pattern-flying-101/8992882-os-ys-cad.html)

Cdallas2

08-05-2009 04:14 PM

OS or YS in Cad

Need a bit of help.....

Does anyone have a DXF or DWG of either a OS .91 or a YS 1.10 out there?

Thanks

FlyingWorks

08-05-2009 05:06 PM

RE: OS or YS in Cad

Hi Cdallas2, I have the old YS 120 A/C:

- Plan and side view.
- DWG file format.
- 2D.

Please let me know if it could be of your interest.

Regards

Federico H.

rwlewis

08-05-2009 07:09 PM

RE: OS or YS in Cad

I've got a 3d model of a YS110FZ on a Hyde mount, I can do a DXF of a side view of it tomorrow at the office....

Richard

Cdallas2

08-12-2009 07:16 AM

RE: OS or YS in Cad

Can someone at least give me the spinner to firewall distance required for a YS 1.10 and mount.

Thanks

rwlewis

08-12-2009 07:49 AM

RE: OS or YS in Cad

1 Attachment(s)

Sorry it took me a while to locate it.....

Richard

jnhiller

08-12-2009 11:32 AM

RE: OS or YS in Cad

1 Attachment(s)

I don't visit here often. Saw your request for a YS-91 DXF file. Tried to upload it. No go, evidently not supported. Here is a pdf of my drawing.
Contact me directly for a dxf file. I've used 2-D CAD for several years and have many commonly used components.
I'm currently detailing an OS 160 pattern airplane.
Jim

All times are GMT -8. The time now is 06:13 PM.