spirit pilot

Hi guys
Wondering if there is a way to set up the DX9 so a switch on the transmitter will disarm or arm the throttle for electric flight. My goal is to have it set up where I can flip a switch
and disable the throttle with the battery plugged in to the system, then flip the switch at the flight line to arm the throttle and launch.

BarracudaHockey

My Feedback: (11)

Throttle Cut function.

I use the switch on the back right (I think its H)

Enable the function, scroll down to switch and flip the switch you want

flyinwalenda

My Feedback: (5)

^^^^That's how you do it.
You will have to adjust the percentages to make sure the motor won't run at all when the switch is on and also so it won't come up to idle when the switch is off.
Also, remove the prop or have the plane restrained before doing this.