Dx8
03-16-2015, 07:29 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2014
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Dx8
Hi
I am running into some issues with my DX8. For some strange reason the rudder is coming off centre (at around 40%) every time I move the elevator stick FULL Down. I have to move the elevator FULL up, and the rudder stick left or right and sometimes the rudder gets centred again. I have turned on the TX without any receivers, to test it stand alone, and I get the same problem, so I figured something is wrong in the TX.
Any ideas? I have written to Horizon Hobby already.
Regards
I am running into some issues with my DX8. For some strange reason the rudder is coming off centre (at around 40%) every time I move the elevator stick FULL Down. I have to move the elevator FULL up, and the rudder stick left or right and sometimes the rudder gets centred again. I have turned on the TX without any receivers, to test it stand alone, and I get the same problem, so I figured something is wrong in the TX.
Any ideas? I have written to Horizon Hobby already.
Regards
03-17-2015, 11:06 AM
#2
Senior Member
Join Date: Sep 2007
Location: Sanger,
CA
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
It needs to be sent in for service.Start the process here.
http://www.horizonhobby.com/content/...service-center
http://www.horizonhobby.com/content/...service-center
03-17-2015, 11:06 AM
#3
Senior Member
Join Date: Sep 2007
Location: Sanger,
CA
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
It needs to be sent in for service.Start the process here.
http://www.horizonhobby.com/content/...service-center
http://www.horizonhobby.com/content/...service-center
