JR & Airtronics Xtal compatibility
#2
Senior Member
My Feedback: (3)
Join Date: Mar 2002
Location: Bloomington,
MN
Posts: 3,282
Likes: 0
Received 0 Likes
on
0 Posts
RE: JR & Airtronics Xtal compatibility
Not likely. JR receivers are generally single conversion, meaning that there's no intermediate frequency as there is in a dual conversion receiver (such as Airtronics). Different manufacturers also use different crystal cuts. It's generally acknowledged that you can use a Hitec DC crystal in a Futaba receiver, though it's not always generally accepted as a safe practice. That's the only exception that I know of. Why not just buy the proper crystal?
#3
Junior Member
Thread Starter
Join Date: Jul 2003
Location: Milan, ITALY
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: JR & Airtronics Xtal compatibility
I was speaking about transmitter's Xtals, not receiver's. I know that there is not compatibility between single and dual conversion receivers. Unfortunately Airtronics xtals are not available in Italy while Hitech are. Thank you.