futaba 9cap
#1
Member
Thread Starter
Join Date: Mar 2004
Location: SryB.C., CANADA
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
futaba 9cap
I have just recently purchased a futaba 9cap, for airoplanes, transmitter came with low band chrystal, and module, but I really have know knowledge on what reciever I need to purchase for this unit, It has been years since I have used one of these. I am curently in the prosess of building a top flite giant scale corsair. Could anyone tell me of what type of reciever is needed, some series are fp 149dp, or r149dp, or do I even need a 9 channel reciever, I am confussed, just need a little heads up before I make the purchase!
Thanks
D M
Thanks
D M
#2
Junior Member
Join Date: Jan 2004
Location: Seattle, WA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
RE: futaba 9cap
I also recently purchased a 9CAP for airplanes. The receiver mine came with is a R149DP. The 9CAP can transmit FM or PCM so you could also use a FM receiver. I think the FM receivers only do 8 channels but the PCM receivers do all 9 channels.
Kris
Kris
#3
Senior Member
My Feedback: (9)
Join Date: Feb 2003
Location: Burien, WA
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
RE: futaba 9cap
Do yourself a favor and get the 149DP on the low band!The reciever is PCM which is a digital type signal.the analog vertion is called a 149df.Unlimited mixing possibilities with the 149DP and the 9CAP!!!
#4
Senior Member
My Feedback: (16)
Join Date: Apr 2002
Location: Locust Grove,
GA
Posts: 12,942
Likes: 0
Received 0 Likes
on
0 Posts
RE: futaba 9cap
You can use any futaba receiver that is on the same frequency as the transmitter (except some of the very old models)
Some I would recommend are:
R127DF
R138DP
R148DF
R148DP
R149DP
R309DS
Some I would recommend are:
R127DF
R138DP
R148DF
R148DP
R149DP
R309DS
#7
Senior Member
My Feedback: (16)
Join Date: Apr 2002
Location: Locust Grove,
GA
Posts: 12,942
Likes: 0
Received 0 Likes
on
0 Posts
RE: futaba 9cap
You can select the transmitter channel on the receiver and it will work.
WHile the receiver will still work on other channels, it will only work on one channel with a single channel transmitter.
WHile the receiver will still work on other channels, it will only work on one channel with a single channel transmitter.